Sign in to follow this  
sparks79

Addonics ADM2PX4 with GA-H97-Gaming 3

Recommended Posts

Can anyone tell me how to setup the bios in the ga-h97-gaming 3 to Recognise Two 950pro attached to two adm2px4.

I have tried just all concievable settings and it still wont recognise the 950pro as usable raid drives.

Would I be right in assuming the raid on this m/b is only for sata type drives and therefore leaving nvme out in the dark.

Share this post


Link to post
Share on other sites

Try the "Support" tab

and/or:

http://www.addonics.com/products/adm2px4.php
http://www.addonics.com/userguides/ADM2PX4.pdf

p.s. As far as I know (and I'm not an expert on the subject),

to create a bootable RAID-0 array, these M.2 SSDs

need to be downstream of DMI link.

Intel's RST only works on ports downstream of Intel's DMI link.

Currently, a bootable RAID-0 array is not supported

by PCIe slots wired directly to the CPU.

Also, the Z97 chipset may be somewhat obsolete

for NVMe technology.

BEST WAY is to contact Addonics Tech Support

for the full story.

Hope this helps.

FYI: we've been advocating more U.2 ports

integrated onto PCIe 3.0 motherboards

and/or add-on NVMe RAID controllers with 4 x U.2 ports

e.g. like this:

http://supremelaw.org/systems/nvme/want.ad.htm

4-port.fan-out.cabling.topology.JPG

http://supremelaw.org/systems/nvme/4xU.2.and.SATA-E.jpg

4xU.2.and.SATA-E.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this