Sign in to follow this  
Followers 0
johnsf100

LSI 9361-4i card

3 posts in this topic

I installed an LSI 9361-4i raid card in an Asrock Z87 Extreme11 motherboard and connected 4 Seagate 600 series 240gb ssd's to it. When I go into the raid web gui it shows 3 of the drives as ready and at full capacity and 1 always as failed and capacity 0 kb. I switched around the cables and still no good. I know the drives work fine connected to the onboard lsi controller as I installed the OS on them in a RAID 0 array. This is my 3rd LSI card and all have the same issues. LSI support thinks it is a signaling issue and Asrock support is not sure. I tried changing the PCI express to gen3 and gen2 but doesn't help. I even switched out the 4th ssd with a sata drive and it shows failed also. I tried different slots also which doesn't help. The card works fine with only 3 ssd's connected as I have installed the OS on it. Any ideas?

Share this post


Link to post
Share on other sites

Is it always showing the same SSD as failed, or just one particular cable? How are you connecting the SSDs to the RAID card? What backplane are you using that the SSDs are installed in?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0