Sign in to follow this  
TechnoFeather

HELP! 9650SE Raid5 Rebuild is stuck at 0% for 7h now...

Recommended Posts

Hi!

I've got a problem with my 9650SE Controller and its Raid5 rebuild. Its stuck at 0% over 7 hours now. Maybe someone here knows why?

Here some data:

tw_cli /c0 show all

/c0 Driver Version = 3.00.04.070

/c0 Model = 9650SE-8LPML

/c0 Available Memory = 224MB

/c0 Firmware Version = FE9X 4.06.00.004

/c0 Bios Version = BE9X 4.05.00.015

/c0 Boot Loader Version = BL9X 3.05.00.002

/c0 Serial Number = L326021A710xxxx

/c0 PCB Version = Rev 032

/c0 PCHIP Version = 2.00

/c0 ACHIP Version = 1.90

/c0 Number of Ports = 8

/c0 Number of Drives = 4

/c0 Number of Units = 1

/c0 Total Optimal Units = 0

/c0 Not Optimal Units = 1

/c0 JBOD Export Policy = off

/c0 Disk Spinup Policy = 1

/c0 Spinup Stagger Time Policy (sec) = 1

/c0 Auto-Carving Policy = off

/c0 Auto-Carving Size = 2048 GB

/c0 Auto-Rebuild Policy = on

/c0 Rebuild Rate = 5

/c0 Verify Rate = 2

/c0 Controller Bus Type = PCIe

/c0 Controller Bus Width = 1 lane

/c0 Controller Bus Speed = 2.5 Gbps/lane

Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy

------------------------------------------------------------------------------

u0 RAID-5 REBUILDING 0% - 64K 4190.92 ON ON

VPort Status Unit Size Type Phy Encl-Slot Model

------------------------------------------------------------------------------

p0 DEGRADED u0 1.36 TB SATA 0 - WDC WD15EADS-00P8B0

p1 OK u0 1.36 TB SATA 1 - WDC WD15EADS-00P8B0

p2 OK u0 1.36 TB SATA 2 - WDC WD15EADS-00P8B0

p3 OK u0 1.36 TB SATA 3 - WDC WD15EADS-00P8B0

tw_cli /c0 show rebuild schedule

Rebuild Schedule for Controller /c0

========================================================

Slot Day Hour Duration Status

--------------------------------------------------------

1 Sun 12:00am 24 hr(s) disabled

2 Mon 12:00am 24 hr(s) disabled

3 Tue 12:00am 24 hr(s) disabled

4 Wed 12:00am 24 hr(s) disabled

5 Thu 12:00am 24 hr(s) disabled

6 Fri 12:00am 24 hr(s) disabled

7 Sat 12:00am 24 hr(s) disabled

'schedule' is not a valid controller parameter of the show command.

tw_cli /c0 show diag

### Time Stamp: 07:56:05 16-Sep-2011

### Host Name: QuadPC

### Host Architecture: x64 (64 bit)

### OS Version: Microsoft Windows Service Pack 1 (Build 7601)

### Model: 9650SE-8LPML

### Serial #: L326021A710xxxx

### Controller ID: 0

### CLI Version: 2.01.09.004

### API Version: 2.06.01.006

### Driver Version: 3.00.04.070

### Firmware Version: FE9X 4.06.00.004

### BIOS Version: BE9X 4.05.00.015

### Available Memory: 224MB

==========================================================================

Diagnostic Information on Controller //QuadPC/c0 ...

--------------------------------------------------------------------------

..power settle (pre-rollcall) pause..

EPCT file not found in flash.

Auto detecting enclosures ...

E=1018 T=00:00:00 : Drive add

P=0h: Drive add confirmed

E=1018 T=00:00:00 : Drive add

P=1h: Drive add confirmed

E=1018 T=00:00:05 : Drive add

P=2h: Drive add confirmed

E=1018 T=00:00:05 : Drive add

P=3h: Drive add confirmed

Inventory done, port=0

Inventory done, port=2

Inventory done, port=1

Inventory done, port=3

Assigning drive handle 0 to port 0

Assigning drive handle 1 to port 1

Assigning drive handle 2 to port 2

Assigning drive handle 3 to port 3

Associate slots: Rollcall, Begin : find drives

Rollcall, Waiting to start DCB read

--PortHandle[ 0] DriveHandle[ 0] phy: 0

DIT status: DRV_PRESENT (0xFF)

Drv type: SATA Direct

Model #: WDC WD15EADS-00P8B0

Serial #: WD-WMAVU049xxxx

Drv FW #: 01.00A01

Capacity: 2930277168 (0x00000000AEA87B30)

drv ports: Supported 1, Connected : 1

WWN: 50014ee001aa0a82

sasAddr: 0000000000000000

Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1,

SCTWriteSame: 1

Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1

Acoustic: 0xFE, def=0x80 (0xFE=best performance)

Security: Status=0x21 (disabled, unlocked)

DMA TCQ: 0 ++ SATA NCQ: 1

Pwr Cycles: 1163, Realloc Sct: 0, Temp (°C): 23

Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs)

Spndle Spd: 5400

--PortHandle[ 1] DriveHandle[ 1] phy: 1

DIT status: DRV_PRESENT (0xFF)

Drv type: SATA Direct

Model #: WDC WD15EADS-00P8B0

Serial #: WD-WMAVU032xxxx

Drv FW #: 01.00A01

Capacity: 2930277168 (0x00000000AEA87B30)

drv ports: Supported 1, Connected : 1

WWN: 50014ee0ac47f9fe

sasAddr: 0000000000000001

Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1,

SCTWriteSame: 1

Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1

Acoustic: 0xFE, def=0x80 (0xFE=best performance)

Security: Status=0x21 (disabled, unlocked)

DMA TCQ: 0 ++ SATA NCQ: 1

Pwr Cycles: 1159, Realloc Sct: 0, Temp (°C): 22

Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs)

Spndle Spd: 5400

--PortHandle[ 2] DriveHandle[ 2] phy: 2

DIT status: DRV_PRESENT (0xFF)

Drv type: SATA Direct

Model #: WDC WD15EADS-00P8B0

Serial #: WD-WMAVU047xxxx

Drv FW #: 01.00A01

Capacity: 2930277168 (0x00000000AEA87B30)

drv ports: Supported 1, Connected : 1

WWN: 50014ee0ac54d08a

sasAddr: 0000000000000002

Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1,

SCTWriteSame: 1

Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1

Acoustic: 0xFE, def=0x80 (0xFE=best performance)

Security: Status=0x21 (disabled, unlocked)

DMA TCQ: 0 ++ SATA NCQ: 1

Pwr Cycles: 1163, Realloc Sct: 0, Temp (°C): 23

Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs)

Spndle Spd: 5400

--PortHandle[ 3] DriveHandle[ 3] phy: 3

DIT status: DRV_PRESENT (0xFF)

Drv type: SATA Direct

Model #: WDC WD15EADS-00P8B0

Serial #: WD-WMAVU048xxxx

Drv FW #: 01.00A01

Capacity: 2930277168 (0x00000000AEA87B30)

drv ports: Supported 1, Connected : 1

WWN: 50014ee0ac54a2b2

sasAddr: 0000000000000003

Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1,

SCTWriteSame: 1

Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1

Acoustic: 0xFE, def=0x80 (0xFE=best performance)

Security: Status=0x21 (disabled, unlocked)

DMA TCQ: 0 ++ SATA NCQ: 1

Pwr Cycles: 1145, Realloc Sct: 0, Temp (°C): 23

Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs)

Spndle Spd: 0

Rollcall, middle : check DCBs, export JBODs

port 0: Valid DCB

port 1: Valid DCB

port 2: Valid DCB

port 3: Valid DCB

Rollcall, finish : make RAID Units

Num Bins = 2048 : Sectors Per Bin = 4291584

Re-numbering units: (there are 1 valid units)

rank # 0x: 0 FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF

old unit#: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

new unit#: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

SETTINGS: Distributing UNIT 0 parameters (count=9, bytes=166)

Port Info [00]: AutoQMode=01 QDepth=31 QMode=NCQ

Port Info [01]: AutoQMode=01 QDepth=31 QMode=NCQ

Port Info [02]: AutoQMode=01 QDepth=31 QMode=NCQ

Port Info [03]: AutoQMode=01 QDepth=31 QMode=NCQ

Updating cache settings for unit: 0

UNIT: 0 (Data) is ONline SCTWriteSame=1, FastRebuild=1, fastVerify=1

Stripelet Size=64k, parities=1

NumActBins=2048, StripesPerBin=11176

Verify RAID5 (80) cap: 8788998144 (task: 0%) (Unclean=0)

CBOD (0)[0] cap: 2929666048 (lbaOff 0)

CBOD (1)[1] cap: 2929666048 (lbaOff 0)

CBOD (2)[2] cap: 2929666048 (lbaOff 0)

CBOD (3)[3] cap: 2929666048 (lbaOff 0)

LUN 0x0 Start LBA 0x0 Size 0x20bdd7800

Cache Settings: WCE=0 - (ForceDriveCacheOn=0) - RCD=0

IgnoreFua=0, WriteJournaling=1, DisableCacheOnDegrade=1

Port Info [00]: AutoQMode=01 QDepth=31 QMode=NCQ

Port Info [01]: AutoQMode=01 QDepth=31 QMode=NCQ

Port Info [02]: AutoQMode=01 QDepth=31 QMode=NCQ

Port Info [03]: AutoQMode=01 QDepth=31 QMode=NCQ

Replay done, D=0x0, P=0x0

AMI Assoc. Slots: AMI 907x enclosure not present.

DcbMgr::WriteSegment(map=0x4B8FB0, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B8FB0, segID=0x33, events=8, error=0x0)

InitConnect credits: 256

DcbMgr::WriteSegment(map=0x4B7D98, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 00:00:10)

DcbMgr::WriteSegment(map=0x4B7DF0, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 00:00:10)

features: 0x00000003

Driver Firmware

SRL 0x0025 0x0024

ArchId 0x0000 0x0006

Branch 0x0004 0x0000

Build 0x0046 0x009B

Result 0x00000002

64 bit SGL format

Start unit 0x0 Time : 00:00:10

Rollcall, Begin : find drives

Inventory done, port=0

Inventory done, port=1

Inventory done, port=2

Inventory done, port=3

Associate slots: Rollcall, Waiting to start DCB read

--PortHandle[ 0] DriveHandle[ 0] phy: 0

DIT status: DRV_PRESENT (0xFF)

Drv type: SATA Direct

Model #: WDC WD15EADS-00P8B0

Serial #: WD-WMAVU049xxxx

Drv FW #: 01.00A01

Capacity: 2930277168 (0x00000000AEA87B30)

drv ports: Supported 1, Connected : 1

WWN: 50014ee001aa0a82

sasAddr: 0000000000000000

Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1,

SCTWriteSame: 1

Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1

Acoustic: 0xFE, def=0x80 (0xFE=best performance)

Security: Status=0x21 (disabled, unlocked)

DMA TCQ: 0 ++ SATA NCQ: 1

Pwr Cycles: 1163, Realloc Sct: 0, Temp (°C): 23

Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs)

Spndle Spd: 5400

--PortHandle[ 1] DriveHandle[ 1] phy: 1

DIT status: DRV_PRESENT (0xFF)

Drv type: SATA Direct

Model #: WDC WD15EADS-00P8B0

Serial #: WD-WMAVU032xxxx

Drv FW #: 01.00A01

Capacity: 2930277168 (0x00000000AEA87B30)

drv ports: Supported 1, Connected : 1

WWN: 50014ee0ac47f9fe

sasAddr: 0000000000000001

Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1,

SCTWriteSame: 1

Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1

Acoustic: 0xFE, def=0x80 (0xFE=best performance)

Security: Status=0x21 (disabled, unlocked)

DMA TCQ: 0 ++ SATA NCQ: 1

Pwr Cycles: 1159, Realloc Sct: 0, Temp (°C): 22

Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs)

Spndle Spd: 5400

--PortHandle[ 2] DriveHandle[ 2] phy: 2

DIT status: DRV_PRESENT (0xFF)

Drv type: SATA Direct

Model #: WDC WD15EADS-00P8B0

Serial #: WD-WMAVU047xxxx

Drv FW #: 01.00A01

Capacity: 2930277168 (0x00000000AEA87B30)

drv ports: Supported 1, Connected : 1

WWN: 50014ee0ac54d08a

sasAddr: 0000000000000002

Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1,

SCTWriteSame: 1

Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1

Acoustic: 0xFE, def=0x80 (0xFE=best performance)

Security: Status=0x21 (disabled, unlocked)

DMA TCQ: 0 ++ SATA NCQ: 1

Pwr Cycles: 1163, Realloc Sct: 0, Temp (°C): 23

Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs)

Spndle Spd: 5400

--PortHandle[ 3] DriveHandle[ 3] phy: 3

DIT status: DRV_PRESENT (0xFF)

Drv type: SATA Direct

Model #: WDC WD15EADS-00P8B0

Serial #: WD-WMAVU048xxxx

Drv FW #: 01.00A01

Capacity: 2930277168 (0x00000000AEA87B30)

drv ports: Supported 1, Connected : 1

WWN: 50014ee0ac54a2b2

sasAddr: 0000000000000003

Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1,

SCTWriteSame: 1

Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1

Acoustic: 0xFE, def=0x80 (0xFE=best performance)

Security: Status=0x21 (disabled, unlocked)

DMA TCQ: 0 ++ SATA NCQ: 1

Pwr Cycles: 1145, Realloc Sct: 0, Temp (°C): 23

Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs)

Spndle Spd: 5400

EVPD pg 0h

EVPD pg 80h

EVPD pg 83h

ReportLuns Cmd, Unit 0

LUN # 0 added

Send AEN (code, time): 0x31, 01/01/1970 00:01:00

Synchronize host/controller time

(EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71)

AutoSpare check...

SELF TEST: all tests completed.

Unit 0 A-Verifier STARTED

Stripelet Size=64k, parities=1

NumActBins=2048, StripesPerBin=11176

Verify RAID5 (80) cap: 8788998144 (task: 0%) (Unclean=0)

CBOD (0)[0] cap: 2929666048 (lbaOff 0)

CBOD (1)[1] cap: 2929666048 (lbaOff 0)

CBOD (2)[2] cap: 2929666048 (lbaOff 0)

CBOD (3)[3] cap: 2929666048 (lbaOff 0)

Send AEN (code, time): 0x29, 09/14/2011 11:16:03

Verify started

(EC:0x29, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=03, Type=0x71)

unit=0

DcbMgr::WriteSegment(map=0x671544, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 11:16:03)

DcbMgr::WriteSegment(map=0x67159C, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 11:16:03)

[A:1][A:2][A:3][A:4][A:5][A:6][A:7]

[A:8][A:9][A:a][A:b][A:c][A:d][A:e][A:f]

DcbMgr::WriteSegment(map=0x671544, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 11:52:08)

DcbMgr::WriteSegment(map=0x67159C, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 11:52:08)

[A:10][A:11]DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7CB8, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 11:57:33)

DcbMgr::WriteSegment(map=0x4B7D10, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 11:57:33)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

Auto Clean: 0

DcbMgr::WriteSegment(map=0x4C0238, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 11:59:13)

DcbMgr::WriteSegment(map=0x4C0290, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 11:59:13)

DcbMgr::WriteSegment(map=0x4C02B8, segID=0x32, events=8, error=0x0)

[A:12][A:13][A:14]Send AEN (code, time): 0x31, 09/14/2011 12:05:03

Synchronize host/controller time

(EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71)

[A:15][A:16][A:17]

[A:18][A:19][A:1a][A:1b][A:1c][A:1d][A:1e][A:1f]

DcbMgr::WriteSegment(map=0x671544, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 12:29:43)

DcbMgr::WriteSegment(map=0x67159C, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 12:29:43)

[A:20][A:21][A:22][A:23][A:24][A:25][A:26][A:27]

[A:28][A:29][A:2a]Send AEN (code, time): 0x31, 09/14/2011 12:55:03

Synchronize host/controller time

(EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71)

[A:2b][A:2c][A:2d]DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7CB8, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 13:01:53)

DcbMgr::WriteSegment(map=0x4B7D10, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 13:01:53)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

[A:2e]Auto Clean: 0

DcbMgr::WriteSegment(map=0x4C0238, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 13:05:13)

DcbMgr::WriteSegment(map=0x4C0290, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 13:05:13)

DcbMgr::WriteSegment(map=0x4C02B8, segID=0x32, events=8, error=0x0)

[A:2f]

DcbMgr::WriteSegment(map=0x671544, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 13:06:58)

DcbMgr::WriteSegment(map=0x67159C, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 13:06:58)

[A:30][A:31][A:32][A:33][A:34][A:35][A:36][A:37]

[A:38][A:39]DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7CB8, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 13:31:33)

DcbMgr::WriteSegment(map=0x4B7D10, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 13:31:33)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

Auto Clean: 0

DcbMgr::WriteSegment(map=0x4C0238, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 13:33:33)

DcbMgr::WriteSegment(map=0x4C0290, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 13:33:33)

DcbMgr::WriteSegment(map=0x4C02B8, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7CB8, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 13:34:08)

DcbMgr::WriteSegment(map=0x4B7D10, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 13:34:08)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

[A:3a]DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

Auto Clean: 0

DcbMgr::WriteSegment(map=0x4C0238, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 13:36:08)

DcbMgr::WriteSegment(map=0x4C0290, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 13:36:08)

DcbMgr::WriteSegment(map=0x4C02B8, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7CB8, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 13:37:03)

DcbMgr::WriteSegment(map=0x4B7D10, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 13:37:03)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

[A:3b]DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

Auto Clean: 0

DcbMgr::WriteSegment(map=0x4C0238, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 13:38:33)

DcbMgr::WriteSegment(map=0x4C0290, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 13:38:33)

DcbMgr::WriteSegment(map=0x4C02B8, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7CB8, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 13:39:33)

DcbMgr::WriteSegment(map=0x4B7D10, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 13:39:33)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

InitConnect credits: 1

Updating cache settings for unit: 0

DcbMgr::WriteSegment(map=0x4C7620, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 13:39:38)

DcbMgr::WriteSegment(map=0x4C7678, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 13:39:38)

Unit 0 A-Verifier STOPPED

Auto Clean: 0

DcbMgr::WriteSegment(map=0x4C0238, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 13:39:38)

DcbMgr::WriteSegment(map=0x4C0290, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 13:39:38)

DcbMgr::WriteSegment(map=0x4C02B8, segID=0x32, events=8, error=0x0)

features: 0x00000001

64 bit SGL format

InitConnect credits: 1

features: 0x00000001

64 bit SGL format

Power state interrupt 0x00

Time : ..power settle (pre-rollcall) pause..

EPCT file not found in flash.

Auto detecting enclosures ...

E=1018 T=00:00:00 : Drive add

P=0h: Drive add confirmed

Inventory done, port=0

Assigning drive handle 0 to port 0

Associate slots:

E=1018 T=00:00:00 : Drive add

P=1h: Drive add confirmed

Inventory done, port=1

Assigning drive handle 1 to port 1

Associate slots:

E=1018 T=00:00:00 : Drive add

P=2h: Drive add confirmed

Inventory done, port=2

Assigning drive handle 2 to port 2

Associate slots:

E=1018 T=00:00:05 : Drive add

P=3h: Drive add confirmed

Inventory done, port=3

Assigning drive handle 3 to port 3

Associate slots: Rollcall, Begin : find drives

Rollcall, Waiting to start DCB read

--PortHandle[ 0] DriveHandle[ 0] phy: 0

DIT status: DRV_PRESENT (0xFF)

Drv type: SATA Direct

Model #: WDC WD15EADS-00P8B0

Serial #: WD-WMAVU049xxxx

Drv FW #: 01.00A01

Capacity: 2930277168 (0x00000000AEA87B30)

drv ports: Supported 1, Connected : 1

WWN: 50014ee001aa0a82

sasAddr: 0000000000000000

Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1,

SCTWriteSame: 1

Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1

Acoustic: 0xFE, def=0x80 (0xFE=best performance)

Security: Status=0x21 (disabled, unlocked)

DMA TCQ: 0 ++ SATA NCQ: 1

Pwr Cycles: 1163, Realloc Sct: 0, Temp (°C): 33

Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs)

Spndle Spd: 5400

--PortHandle[ 1] DriveHandle[ 1] phy: 1

DIT status: DRV_PRESENT (0xFF)

Drv type: SATA Direct

Model #: WDC WD15EADS-00P8B0

Serial #: WD-WMAVU032xxxx

Drv FW #: 01.00A01

Capacity: 2930277168 (0x00000000AEA87B30)

drv ports: Supported 1, Connected : 1

WWN: 50014ee0ac47f9fe

sasAddr: 0000000000000001

Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1,

SCTWriteSame: 1

Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1

Acoustic: 0xFE, def=0x80 (0xFE=best performance)

Security: Status=0x21 (disabled, unlocked)

DMA TCQ: 0 ++ SATA NCQ: 1

Pwr Cycles: 1159, Realloc Sct: 0, Temp (°C): 32

Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs)

Spndle Spd: 5400

--PortHandle[ 2] DriveHandle[ 2] phy: 2

DIT status: DRV_PRESENT (0xFF)

Drv type: SATA Direct

Model #: WDC WD15EADS-00P8B0

Serial #: WD-WMAVU047xxxx

Drv FW #: 01.00A01

Capacity: 2930277168 (0x00000000AEA87B30)

drv ports: Supported 1, Connected : 1

WWN: 50014ee0ac54d08a

sasAddr: 0000000000000002

Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1,

SCTWriteSame: 1

Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1

Acoustic: 0xFE, def=0x80 (0xFE=best performance)

Security: Status=0x21 (disabled, unlocked)

DMA TCQ: 0 ++ SATA NCQ: 1

Pwr Cycles: 1163, Realloc Sct: 0, Temp (°C): 33

Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs)

Spndle Spd: 5400

--PortHandle[ 3] DriveHandle[ 3] phy: 3

DIT status: DRV_PRESENT (0xFF)

Drv type: SATA Direct

Model #: WDC WD15EADS-00P8B0

Serial #: WD-WMAVU048xxxx

Drv FW #: 01.00A01

Capacity: 2930277168 (0x00000000AEA87B30)

drv ports: Supported 1, Connected : 1

WWN: 50014ee0ac54a2b2

sasAddr: 0000000000000003

Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1,

SCTWriteSame: 1

Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1

Acoustic: 0xFE, def=0x80 (0xFE=best performance)

Security: Status=0x21 (disabled, unlocked)

DMA TCQ: 0 ++ SATA NCQ: 1

Pwr Cycles: 1145, Realloc Sct: 0, Temp (°C): 32

Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs)

Spndle Spd: 5400

Rollcall, middle : check DCBs, export JBODs

port 0: Valid DCB

port 1: Valid DCB

port 2: Valid DCB

port 3: Valid DCB

Rollcall, finish : make RAID Units

Num Bins = 2048 : Sectors Per Bin = 4291584

Re-numbering units: (there are 1 valid units)

rank # 0x: 0 FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF

old unit#: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

new unit#: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

SETTINGS: Distributing UNIT 0 parameters (count=9, bytes=166)

Port Info [00]: AutoQMode=01 QDepth=31 QMode=NCQ

Port Info [01]: AutoQMode=01 QDepth=31 QMode=NCQ

Port Info [02]: AutoQMode=01 QDepth=31 QMode=NCQ

Port Info [03]: AutoQMode=01 QDepth=31 QMode=NCQ

Updating cache settings for unit: 0

UNIT: 0 (Data) is ONline SCTWriteSame=1, FastRebuild=1, fastVerify=1

Stripelet Size=64k, parities=1

NumActBins=2048, StripesPerBin=11176

Verify RAID5 (80) cap: 8788998144 (task: 46%) (Unclean=0)

CBOD (0)[0] cap: 2929666048 (lbaOff 0)

CBOD (1)[1] cap: 2929666048 (lbaOff 0)

CBOD (2)[2] cap: 2929666048 (lbaOff 0)

CBOD (3)[3] cap: 2929666048 (lbaOff 0)

LUN 0x0 Start LBA 0x0 Size 0x20bdd7800

Cache Settings: WCE=0 - (ForceDriveCacheOn=0) - RCD=0

IgnoreFua=0, WriteJournaling=1, DisableCacheOnDegrade=1

Port Info [00]: AutoQMode=01 QDepth=31 QMode=NCQ

Port Info [01]: AutoQMode=01 QDepth=31 QMode=NCQ

Port Info [02]: AutoQMode=01 QDepth=31 QMode=NCQ

Port Info [03]: AutoQMode=01 QDepth=31 QMode=NCQ

Replay done, D=0x0, P=0x0

AMI Assoc. Slots: AMI 907x enclosure not present.

DcbMgr::WriteSegment(map=0x4B8FB0, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B8FB0, segID=0x33, events=8, error=0x0)

InitConnect credits: 0

features: 0x00000000

32 bit SGL format

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while reading packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

InitConnect credits: 256

DcbMgr::WriteSegment(map=0x4B7D98, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 13:40:33)

DcbMgr::WriteSegment(map=0x4B7DF0, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 13:40:33)

features: 0x00000003

Driver Firmware

SRL 0x0025 0x0024

ArchId 0x0000 0x0006

Branch 0x0004 0x0000

Build 0x0046 0x009B

Result 0x00000002

64 bit SGL format

EVPD pg 0h

EVPD pg 80h

EVPD pg 83h

ReportLuns Cmd, Unit 0

LUN # 0 added

Send AEN (code, time): 0x31, 09/14/2011 13:40:48

Synchronize host/controller time

(EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7CB8, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 13:40:45)

DcbMgr::WriteSegment(map=0x4B7D10, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 13:40:45)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

AutoSpare check...

SELF TEST: all tests completed.

Unit 0 A-Verifier STARTED

Stripelet Size=64k, parities=1

NumActBins=2048, StripesPerBin=11176

Verify RAID5 (80) cap: 8788998144 (task: 46%) (Unclean=1)

CBOD (0)[0] cap: 2929666048 (lbaOff 0)

CBOD (1)[1] cap: 2929666048 (lbaOff 0)

CBOD (2)[2] cap: 2929666048 (lbaOff 0)

CBOD (3)[3] cap: 2929666048 (lbaOff 0)

Send AEN (code, time): 0x29, 09/14/2011 13:41:45

Verify started

(EC:0x29, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=03, Type=0x71)

unit=0

DcbMgr::WriteSegment(map=0x671544, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 13:41:45)

DcbMgr::WriteSegment(map=0x67159C, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 13:41:45)

Auto Clean: 0

DcbMgr::WriteSegment(map=0x4C0238, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 13:42:00)

DcbMgr::WriteSegment(map=0x4C0290, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 13:42:00)

DcbMgr::WriteSegment(map=0x4C02B8, segID=0x32, events=8, error=0x0)

[A:3c][A:3d][A:3e][A:3f][A:40][A:41][A:42]

[A:43][A:44][A:45][A:46][A:47][A:48][A:49][A:4a]

DcbMgr::WriteSegment(map=0x671544, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 14:26:20)

DcbMgr::WriteSegment(map=0x67159C, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 14:26:20)

[A:4b]Send AEN (code, time): 0x31, 09/14/2011 14:30:45

Synchronize host/controller time

(EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71)

[A:4c]DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7CB8, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 14:36:35)

DcbMgr::WriteSegment(map=0x4B7D10, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 14:36:35)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

[A:4d]DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

Auto Clean: 0

DcbMgr::WriteSegment(map=0x4C0238, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 14:37:50)

DcbMgr::WriteSegment(map=0x4C0290, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 14:37:50)

DcbMgr::WriteSegment(map=0x4C02B8, segID=0x32, events=8, error=0x0)

[A:4e][A:4f][A:50][A:51][A:52]

[A:53][A:54]DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7CB8, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 14:59:45)

DcbMgr::WriteSegment(map=0x4B7D10, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 14:59:45)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0)

[A:55]Auto Clean: 0

DcbMgr::WriteSegment(map=0x4C0238, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 15:01:45)

DcbMgr::WriteSegment(map=0x4C0290, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 15:01:45)

DcbMgr::WriteSegment(map=0x4C02B8, segID=0x32, events=8, error=0x0)

[A:56][A:57][A:58][A:59][A:5a]

DcbMgr::WriteSegment(map=0x671544, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 15:16:35)

DcbMgr::WriteSegment(map=0x67159C, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 15:16:35)

[A:5b]Send AEN (code, time): 0x31, 09/14/2011 15:20:45

Synchronize host/controller time

(EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71)

[A:5c][A:5d][A:5e][A:5f][A:60][A:61][A:62]

[A:63][A:64][A:65][A:66][A:67][A:68]Send AEN (code, time): 0x31, 09/14/2011 16:10:45

Synchronize host/controller time

(EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71)

[A:69][A:6a]

DcbMgr::WriteSegment(map=0x671544, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 16:15:55)

DcbMgr::WriteSegment(map=0x67159C, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 16:15:55)

[A:6b]

E=0202 T=16:20:00 : Data ECC error (int)

task file written out : cd dh ch cl sn sc ft

: 60 D2 2D D6 80 80 80

E=0202 T=16:20:00 P=0 : Soft reset drive

E=0207 T=16:20:00 P=0 : ResetDriveWait

E=0207 T=16:20:00 P=0 : ResetDriveWait

E=0202 T=16:20:00 P=0 : Inserting Set UDMA command

E=0202 T=16:20:00 P=0h: Repair LBA 0x922dd68b...OK

E=0202 T=16:20:00 P=0h: Repair LBA 0x922dd68c...OK

E=0202 T=16:20:00 P=0h: Repair LBA 0x922dd68d...OK

Send AEN (code, time): 0x23, 09/14/2011 16:20:00

Sector repair completed

(EC:0x23, SK=0x01, ASC=0x11, ASCQ=0x00, SEV=02, Type=0x71)

port=0, LBA=0x922DD68C

E=0202 T=16:20:00 P=0h: Complete IPRs in error

A-Verifier ERROR, time: eacae (ErrorCode): 202

Start Stripe #: 01245bad

BBU status word : 0x0

--------------------------------------------------------------------------

//QuadPC/c0 Controller Log Information ...

--------------------------------------------------------------------------

..power settle (pre-rollcall) pause..

EPCT file not found in flash.

Auto detecting enclosures ...

E=1018 T=00:00:00 : Drive add

P=0h: Drive add confirmed

E=1018 T=00:00:00 : Drive add

P=1h: Drive add confirmed

E=1018 T=00:00:05 : Drive add

P=2h: Drive add confirmed

E=1018 T=00:00:05 : Drive add

P=3h: Drive add confirmed

Inventory done, port=2

Inventory done, port=0

Inventory done, port=1

Inventory done, port=3

Assigning drive handle 0 to port 0

Assigning drive handle 1 to port 1

Assigning drive handle 2 to port 2

Assigning drive handle 3 to port 3

Associate slots: Rollcall, Begin : find drives

Rollcall, Waiting to start DCB read

--PortHandle[ 0] DriveHandle[ 0] phy: 0

DIT status: DRV_PRESENT (0xFF)

Drv type: SATA Direct

Model #: WDC WD15EADS-00P8B0

Serial #: WD-WCAVU024xxxx

Drv FW #: 01.00A01

Capacity: 2930277168 (0x00000000AEA87B30)

drv ports: Supported 1, Connected : 1

WWN: 50014ee258bf02bc

sasAddr: 0000000000000000

Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1,

SCTWriteSame: 1

Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1

Acoustic: 0xFE, def=0x80 (0xFE=best performance)

Security: Status=0x21 (disabled, unlocked)

DMA TCQ: 0 ++ SATA NCQ: 1

Pwr Cycles: 1, Realloc Sct: 0, Temp (°C): 26

Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs)

Spndle Spd: 5400

--PortHandle[ 1] DriveHandle[ 1] phy: 1

DIT status: DRV_PRESENT (0xFF)

Drv type: SATA Direct

Model #: WDC WD15EADS-00P8B0

Serial #: WD-WMAVU032xxxx

Drv FW #: 01.00A01

Capacity: 2930277168 (0x00000000AEA87B30)

drv ports: Supported 1, Connected : 1

WWN: 50014ee0ac47f9fe

sasAddr: 0000000000000001

Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1,

SCTWriteSame: 1

Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1

Acoustic: 0xFE, def=0x80 (0xFE=best performance)

Security: Status=0x21 (disabled, unlocked)

DMA TCQ: 0 ++ SATA NCQ: 1

Pwr Cycles: 1164, Realloc Sct: 0, Temp (°C): 26

Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs)

Spndle Spd: 5400

--PortHandle[ 2] DriveHandle[ 2] phy: 2

DIT status: DRV_PRESENT (0xFF)

Drv type: SATA Direct

Model #: WDC WD15EADS-00P8B0

Serial #: WD-WMAVU047xxxx

Drv FW #: 01.00A01

Capacity: 2930277168 (0x00000000AEA87B30)

drv ports: Supported 1, Connected : 1

WWN: 50014ee0ac54d08a

sasAddr: 0000000000000002

Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1,

SCTWriteSame: 1

Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1

Acoustic: 0xFE, def=0x80 (0xFE=best performance)

Security: Status=0x21 (disabled, unlocked)

DMA TCQ: 0 ++ SATA NCQ: 1

Pwr Cycles: 1168, Realloc Sct: 0, Temp (°C): 27

Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs)

Spndle Spd: 5400

--PortHandle[ 3] DriveHandle[ 3] phy: 3

DIT status: DRV_PRESENT (0xFF)

Drv type: SATA Direct

Model #: WDC WD15EADS-00P8B0

Serial #: WD-WMAVU048xxxx

Drv FW #: 01.00A01

Capacity: 2930277168 (0x00000000AEA87B30)

drv ports: Supported 1, Connected : 1

WWN: 50014ee0ac54a2b2

sasAddr: 0000000000000003

Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1,

SCTWriteSame: 1

Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1

Acoustic: 0xFE, def=0x80 (0xFE=best performance)

Security: Status=0x21 (disabled, unlocked)

DMA TCQ: 0 ++ SATA NCQ: 1

Pwr Cycles: 1150, Realloc Sct: 0, Temp (°C): 26

Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs)

Spndle Spd: 0

Rollcall, middle : check DCBs, export JBODs

port 0: No DCB (JBOD)

port 1: Valid DCB

port 2: Valid DCB

port 3: Valid DCB

Rollcall, finish : make RAID Units

Num Bins = 2048 : Sectors Per Bin = 4291584

Re-numbering units: (there are 1 valid units)

rank # 0x: 0 FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF

old unit#: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

new unit#: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

SETTINGS: Distributing UNIT 0 parameters (count=9, bytes=166)

Port Info [01]: AutoQMode=01 QDepth=31 QMode=NCQ

Port Info [02]: AutoQMode=01 QDepth=31 QMode=NCQ

Port Info [03]: AutoQMode=01 QDepth=31 QMode=NCQ

Updating cache settings for unit: 0

UNIT: 0 (Data) is ONline SCTWriteSame=1, FastRebuild=1, fastVerify=1

Stripelet Size=64k, parities=1

NumActBins=2048, StripesPerBin=11176

Degrade RAID5 (80) cap: 8788998144 (task: 0%) (Unclean=0)

d> CBOD (0)[-1] cap: 2929666048 (lbaOff 0)

CBOD (1)[1] cap: 2929666048 (lbaOff 0)

CBOD (2)[2] cap: 2929666048 (lbaOff 0)

CBOD (3)[3] cap: 2929666048 (lbaOff 0)

LUN 0x0 Start LBA 0x0 Size 0x20bdd7800

Cache Settings: WCE=0 - (ForceDriveCacheOn=0) - RCD=0

IgnoreFua=0, WriteJournaling=1, DisableCacheOnDegrade=1

Port Info [01]: AutoQMode=01 QDepth=31 QMode=NCQ

Port Info [02]: AutoQMode=01 QDepth=31 QMode=NCQ

Port Info [03]: AutoQMode=01 QDepth=31 QMode=NCQ

Replay done, D=0x0, P=0x0

AMI Assoc. Slots: AMI 907x enclosure not present.

DcbMgr::WriteSegment(map=0x4B8FB0, segID=0x32, events=6, error=0x0)

DcbMgr::WriteSegment(map=0x4B8FB0, segID=0x33, events=6, error=0x0)

InitConnect credits: 0

features: 0x00000000

32 bit SGL format

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while reading packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while reading packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

InitConnect credits: 256

DcbMgr::WriteSegment(map=0x4B7D98, segID=0x33, events=6, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 00:32:31)

DcbMgr::WriteSegment(map=0x4B7DF0, segID=0x8, events=6, error=0x0)

DcbMgr::UpdateStatus: (finish 00:32:31)

Send AEN (code, time): 0x6, 09/16/2011 00:32:31

Incomplete unit detected

(EC:0x06, SK=0x00, ASC=0x6b, ASCQ=0x02, SEV=02, Type=0x71)

unit=0

features: 0x00000003

Driver Firmware

SRL 0x0025 0x0024

ArchId 0x0000 0x0006

Branch 0x0004 0x0000

Build 0x0046 0x009B

Result 0x00000002

64 bit SGL format

EVPD pg 0h

EVPD pg 80h

EVPD pg 83h

ReportLuns Cmd, Unit 0

LUN # 0 added

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=6, error=0x0)

DcbMgr::WriteSegment(map=0x4B7CB8, segID=0x33, events=6, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 00:32:46)

DcbMgr::WriteSegment(map=0x4B7D10, segID=0x8, events=6, error=0x0)

DcbMgr::UpdateStatus: (finish 00:32:46)

DcbMgr::WriteSegment(map=0x4B7CA0, segID=0x33, events=6, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 00:32:46)

DcbMgr::WriteSegment(map=0x4B7CF8, segID=0x8, events=6, error=0x0)

DcbMgr::UpdateStatus: (finish 00:32:46)

Send AEN (code, time): 0x31, 09/16/2011 00:32:51

Synchronize host/controller time

(EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=6, error=0x0)

DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=6, error=0x0)

AutoSpare check...

No Replacement list to sort (1)! 1 drive only!

No Replacement list to sort (4)! 1 drive only!

No Replacement list to sort (5)! 1 drive only!

driveHandle=0 Cap=0xAEA87B30

DcbMgr::UpdateArray: UNIT 0 (time 00:33:28)

DcbMgr::WriteSegment(map=0x4BF3D8, segID=0xF, events=2, error=0x0)

DcbMgr::WriteSegment(map=0x4BF420, segID=0x2, events=6, error=0x0)

DcbMgr::WriteSegment(map=0x4BF3D8, segID=0xF, events=6, error=0x0)

DcbMgr::UpdateArray: (finish 00:33:28)

DcbMgr::WriteSegment(map=0x4BF478, segID=0x32, events=8, error=0x0)

DcbMgr::WriteSegment(map=0x4BF478, segID=0x33, events=8, error=0x0)

UNIT: 0 (Data) is ONline SCTWriteSame=1, FastRebuild=1, fastVerify=1

Stripelet Size=64k, parities=1

NumActBins=2048, StripesPerBin=11176

Rebuild RAID5 (80) cap: 8788998144 (task: 0%) (Unclean=1)

r> CBOD (0)[0] cap: 2929666048 (lbaOff 0)

CBOD (1)[1] cap: 2929666048 (lbaOff 0)

CBOD (2)[2] cap: 2929666048 (lbaOff 0)

CBOD (3)[3] cap: 2929666048 (lbaOff 0)

LUN 0x0 Start LBA 0x0 Size 0x20bdd7800

Cache Settings: WCE=0 - (ForceDriveCacheOn=0) - RCD=0

IgnoreFua=0, WriteJournaling=1, DisableCacheOnDegrade=1

Port Info [00]: AutoQMode=01 QDepth=31 QMode=NCQ

Port Info [01]: AutoQMode=01 QDepth=31 QMode=NCQ

Port Info [02]: AutoQMode=01 QDepth=31 QMode=NCQ

Port Info [03]: AutoQMode=01 QDepth=31 QMode=NCQ

UA:ReplaceUnitPort complete (errorCode): 0

SELF TEST: all tests completed.

Unit 0 A-RebuilderRaid5/6 STARTED

Stripelet Size=64k, parities=1

NumActBins=2048, StripesPerBin=11176

Rebuild RAID5 (80) cap: 8788998144 (task: 0%) (Unclean=1)

r> CBOD (0)[0] cap: 2929666048 (lbaOff 0)

CBOD (1)[1] cap: 2929666048 (lbaOff 0)

CBOD (2)[2] cap: 2929666048 (lbaOff 0)

CBOD (3)[3] cap: 2929666048 (lbaOff 0)

Send AEN (code, time): 0xb, 09/16/2011 00:33:48

Rebuild started

(EC:0x0b, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=03, Type=0x71)

unit=0

DcbMgr::WriteSegment(map=0x66FD34, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 00:33:48)

DcbMgr::WriteSegment(map=0x66FD8C, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 00:33:48)

Auto Clean: 0

DcbMgr::WriteSegment(map=0x4C0238, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 00:33:58)

DcbMgr::WriteSegment(map=0x4C0290, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 00:33:58)

DcbMgr::WriteSegment(map=0x4C02B8, segID=0x32, events=8, error=0x0)

AutoSpare check...

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

[A:1][A:2]BBU comm error 0x241 while writing packet : I2C transaction aborted

SETTINGS: Saving UNIT 0 parameters ... DcbMgr::UpdateSupport: UNIT 0 (time 00:42:08)

DcbMgr::WriteSegment(map=0x4B7DD8, segID=0x4, events=8, error=0x0)

DcbMgr::UpdateSupport: (finish 00:42:08)

done. (count=5, bytes=132)

SETTINGS: Saving UNIT 0 parameters ... DcbMgr::UpdateSupport: UNIT 0 (time 00:42:08)

DcbMgr::WriteSegment(map=0x4B7DD8, segID=0x4, events=8, error=0x0)

DcbMgr::UpdateSupport: (finish 00:42:08)

done. (count=6, bytes=139)

SETTINGS: Saving UNIT 0 parameters ... DcbMgr::UpdateSupport: UNIT 0 (time 00:42:08)

DcbMgr::WriteSegment(map=0x4B7DD8, segID=0x4, events=8, error=0x0)

DcbMgr::UpdateSupport: (finish 00:42:08)

done. (count=7, bytes=146)

BBU comm error 0x241 while writing packet : I2C transaction aborted

Enable write cache; not dirty

Cache Settings: WCE=1 - RCD=0

IgnoreFua=1, WriteJournaling=0, DisableCacheOnDegrade=0

SETTINGS: Saving UNIT 0 parameters ... DcbMgr::UpdateSupport: UNIT 0 (time 00:42:28)

DcbMgr::WriteSegment(map=0x4B7DD8, segID=0x4, events=8, error=0x0)

DcbMgr::UpdateSupport: (finish 00:42:28)

done. (count=8, bytes=152)

BBU comm error 0x241 while writing packet : I2C transaction aborted

[A:3]Send AEN (code, time): 0x31, 09/16/2011 01:22:48

Synchronize host/controller time

(EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71)

[A:4][A:5]Send AEN (code, time): 0x31, 09/16/2011 02:12:48

Synchronize host/controller time

(EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71)

[A:6]Send AEN (code, time): 0x31, 09/16/2011 03:02:48

Synchronize host/controller time

(EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71)

[A:7]

[A:8][A:9][A:a][A:b]Send AEN (code, time): 0x31, 09/16/2011 03:52:48

Synchronize host/controller time

(EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71)

[A:c][A:d][A:e][A:f]

DcbMgr::WriteSegment(map=0x66FD34, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 04:36:03)

DcbMgr::WriteSegment(map=0x66FD8C, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 04:36:03)

[A:10][A:11][A:12]Send AEN (code, time): 0x31, 09/16/2011 04:42:48

Synchronize host/controller time

(EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71)

[A:13][A:14][A:15][A:16][A:17]

[A:18][A:19][A:1a][A:1b][A:1c][A:1d][A:1e][A:1f]

DcbMgr::WriteSegment(map=0x66FD34, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 05:10:13)

DcbMgr::WriteSegment(map=0x66FD8C, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 05:10:13)

[A:20][A:21][A:22][A:23][A:24][A:25][A:26][A:27]

[A:28][A:29]Send AEN (code, time): 0x31, 09/16/2011 05:32:48

Synchronize host/controller time

(EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71)

[A:2a][A:2b][A:2c][A:2d][A:2e][A:2f]

DcbMgr::WriteSegment(map=0x66FD34, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 05:46:38)

DcbMgr::WriteSegment(map=0x66FD8C, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 05:46:38)

[A:30][A:31][A:32][A:33][A:34][A:35][A:36][A:37]

[A:38][A:39][A:3a][A:3b][A:3c][A:3d]Send AEN (code, time): 0x31, 09/16/2011 06:22:48

Synchronize host/controller time

(EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71)

[A:3e][A:3f]

DcbMgr::WriteSegment(map=0x66FD34, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 06:25:38)

DcbMgr::WriteSegment(map=0x66FD8C, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 06:25:38)

[A:40][A:41][A:42][A:43][A:44][A:45][A:46][A:47]

[A:48][A:49][A:4a][A:4b][A:4c][A:4d][A:4e][A:4f]

DcbMgr::WriteSegment(map=0x66FD34, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 07:07:28)

DcbMgr::WriteSegment(map=0x66FD8C, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 07:07:28)

[A:50]Send AEN (code, time): 0x31, 09/16/2011 07:12:48

Synchronize host/controller time

(EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71)

[A:51][A:52][A:53][A:54][A:55][A:56][A:57]

[A:58][A:59][A:5a]BBU comm error 0x241 while writing packet : I2C transaction aborted

[A:5b]BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

[A:5c]BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

[A:5d][A:5e][A:5f]

DcbMgr::WriteSegment(map=0x66FD34, segID=0x33, events=8, error=0x0)

DcbMgr::UpdateStatus: UNIT 0 (time 07:53:33)

DcbMgr::WriteSegment(map=0x66FD8C, segID=0x8, events=8, error=0x0)

DcbMgr::UpdateStatus: (finish 07:53:33)

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

BBU comm error 0x241 while writing packet : I2C transaction aborted

[..................looong space..........................]

Edited by TechnoFeather

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this