TechnoFeather

Member
  • Content Count

    1
  • Joined

  • Last visited

Community Reputation

0 Neutral

About TechnoFeather

  • Rank
    Member
  1. Hi! I've got a problem with my 9650SE Controller and its Raid5 rebuild. Its stuck at 0% over 7 hours now. Maybe someone here knows why? Here some data: tw_cli /c0 show all /c0 Driver Version = 3.00.04.070 /c0 Model = 9650SE-8LPML /c0 Available Memory = 224MB /c0 Firmware Version = FE9X 4.06.00.004 /c0 Bios Version = BE9X 4.05.00.015 /c0 Boot Loader Version = BL9X 3.05.00.002 /c0 Serial Number = L326021A710xxxx /c0 PCB Version = Rev 032 /c0 PCHIP Version = 2.00 /c0 ACHIP Version = 1.90 /c0 Number of Ports = 8 /c0 Number of Drives = 4 /c0 Number of Units = 1 /c0 Total Optimal Units = 0 /c0 Not Optimal Units = 1 /c0 JBOD Export Policy = off /c0 Disk Spinup Policy = 1 /c0 Spinup Stagger Time Policy (sec) = 1 /c0 Auto-Carving Policy = off /c0 Auto-Carving Size = 2048 GB /c0 Auto-Rebuild Policy = on /c0 Rebuild Rate = 5 /c0 Verify Rate = 2 /c0 Controller Bus Type = PCIe /c0 Controller Bus Width = 1 lane /c0 Controller Bus Speed = 2.5 Gbps/lane Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy ------------------------------------------------------------------------------ u0 RAID-5 REBUILDING 0% - 64K 4190.92 ON ON VPort Status Unit Size Type Phy Encl-Slot Model ------------------------------------------------------------------------------ p0 DEGRADED u0 1.36 TB SATA 0 - WDC WD15EADS-00P8B0 p1 OK u0 1.36 TB SATA 1 - WDC WD15EADS-00P8B0 p2 OK u0 1.36 TB SATA 2 - WDC WD15EADS-00P8B0 p3 OK u0 1.36 TB SATA 3 - WDC WD15EADS-00P8B0 tw_cli /c0 show rebuild schedule Rebuild Schedule for Controller /c0 ======================================================== Slot Day Hour Duration Status -------------------------------------------------------- 1 Sun 12:00am 24 hr(s) disabled 2 Mon 12:00am 24 hr(s) disabled 3 Tue 12:00am 24 hr(s) disabled 4 Wed 12:00am 24 hr(s) disabled 5 Thu 12:00am 24 hr(s) disabled 6 Fri 12:00am 24 hr(s) disabled 7 Sat 12:00am 24 hr(s) disabled 'schedule' is not a valid controller parameter of the show command. tw_cli /c0 show diag ### Time Stamp: 07:56:05 16-Sep-2011 ### Host Name: QuadPC ### Host Architecture: x64 (64 bit) ### OS Version: Microsoft Windows Service Pack 1 (Build 7601) ### Model: 9650SE-8LPML ### Serial #: L326021A710xxxx ### Controller ID: 0 ### CLI Version: 2.01.09.004 ### API Version: 2.06.01.006 ### Driver Version: 3.00.04.070 ### Firmware Version: FE9X 4.06.00.004 ### BIOS Version: BE9X 4.05.00.015 ### Available Memory: 224MB ========================================================================== Diagnostic Information on Controller //QuadPC/c0 ... -------------------------------------------------------------------------- ..power settle (pre-rollcall) pause.. EPCT file not found in flash. Auto detecting enclosures ... E=1018 T=00:00:00 : Drive add P=0h: Drive add confirmed E=1018 T=00:00:00 : Drive add P=1h: Drive add confirmed E=1018 T=00:00:05 : Drive add P=2h: Drive add confirmed E=1018 T=00:00:05 : Drive add P=3h: Drive add confirmed Inventory done, port=0 Inventory done, port=2 Inventory done, port=1 Inventory done, port=3 Assigning drive handle 0 to port 0 Assigning drive handle 1 to port 1 Assigning drive handle 2 to port 2 Assigning drive handle 3 to port 3 Associate slots: Rollcall, Begin : find drives Rollcall, Waiting to start DCB read --PortHandle[ 0] DriveHandle[ 0] phy: 0 DIT status: DRV_PRESENT (0xFF) Drv type: SATA Direct Model #: WDC WD15EADS-00P8B0 Serial #: WD-WMAVU049xxxx Drv FW #: 01.00A01 Capacity: 2930277168 (0x00000000AEA87B30) drv ports: Supported 1, Connected : 1 WWN: 50014ee001aa0a82 sasAddr: 0000000000000000 Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1, SCTWriteSame: 1 Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1 Acoustic: 0xFE, def=0x80 (0xFE=best performance) Security: Status=0x21 (disabled, unlocked) DMA TCQ: 0 ++ SATA NCQ: 1 Pwr Cycles: 1163, Realloc Sct: 0, Temp (°C): 23 Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs) Spndle Spd: 5400 --PortHandle[ 1] DriveHandle[ 1] phy: 1 DIT status: DRV_PRESENT (0xFF) Drv type: SATA Direct Model #: WDC WD15EADS-00P8B0 Serial #: WD-WMAVU032xxxx Drv FW #: 01.00A01 Capacity: 2930277168 (0x00000000AEA87B30) drv ports: Supported 1, Connected : 1 WWN: 50014ee0ac47f9fe sasAddr: 0000000000000001 Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1, SCTWriteSame: 1 Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1 Acoustic: 0xFE, def=0x80 (0xFE=best performance) Security: Status=0x21 (disabled, unlocked) DMA TCQ: 0 ++ SATA NCQ: 1 Pwr Cycles: 1159, Realloc Sct: 0, Temp (°C): 22 Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs) Spndle Spd: 5400 --PortHandle[ 2] DriveHandle[ 2] phy: 2 DIT status: DRV_PRESENT (0xFF) Drv type: SATA Direct Model #: WDC WD15EADS-00P8B0 Serial #: WD-WMAVU047xxxx Drv FW #: 01.00A01 Capacity: 2930277168 (0x00000000AEA87B30) drv ports: Supported 1, Connected : 1 WWN: 50014ee0ac54d08a sasAddr: 0000000000000002 Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1, SCTWriteSame: 1 Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1 Acoustic: 0xFE, def=0x80 (0xFE=best performance) Security: Status=0x21 (disabled, unlocked) DMA TCQ: 0 ++ SATA NCQ: 1 Pwr Cycles: 1163, Realloc Sct: 0, Temp (°C): 23 Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs) Spndle Spd: 5400 --PortHandle[ 3] DriveHandle[ 3] phy: 3 DIT status: DRV_PRESENT (0xFF) Drv type: SATA Direct Model #: WDC WD15EADS-00P8B0 Serial #: WD-WMAVU048xxxx Drv FW #: 01.00A01 Capacity: 2930277168 (0x00000000AEA87B30) drv ports: Supported 1, Connected : 1 WWN: 50014ee0ac54a2b2 sasAddr: 0000000000000003 Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1, SCTWriteSame: 1 Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1 Acoustic: 0xFE, def=0x80 (0xFE=best performance) Security: Status=0x21 (disabled, unlocked) DMA TCQ: 0 ++ SATA NCQ: 1 Pwr Cycles: 1145, Realloc Sct: 0, Temp (°C): 23 Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs) Spndle Spd: 0 Rollcall, middle : check DCBs, export JBODs port 0: Valid DCB port 1: Valid DCB port 2: Valid DCB port 3: Valid DCB Rollcall, finish : make RAID Units Num Bins = 2048 : Sectors Per Bin = 4291584 Re-numbering units: (there are 1 valid units) rank # 0x: 0 FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF old unit#: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 new unit#: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 SETTINGS: Distributing UNIT 0 parameters (count=9, bytes=166) Port Info [00]: AutoQMode=01 QDepth=31 QMode=NCQ Port Info [01]: AutoQMode=01 QDepth=31 QMode=NCQ Port Info [02]: AutoQMode=01 QDepth=31 QMode=NCQ Port Info [03]: AutoQMode=01 QDepth=31 QMode=NCQ Updating cache settings for unit: 0 UNIT: 0 (Data) is ONline SCTWriteSame=1, FastRebuild=1, fastVerify=1 Stripelet Size=64k, parities=1 NumActBins=2048, StripesPerBin=11176 Verify RAID5 (80) cap: 8788998144 (task: 0%) (Unclean=0) CBOD (0)[0] cap: 2929666048 (lbaOff 0) CBOD (1)[1] cap: 2929666048 (lbaOff 0) CBOD (2)[2] cap: 2929666048 (lbaOff 0) CBOD (3)[3] cap: 2929666048 (lbaOff 0) LUN 0x0 Start LBA 0x0 Size 0x20bdd7800 Cache Settings: WCE=0 - (ForceDriveCacheOn=0) - RCD=0 IgnoreFua=0, WriteJournaling=1, DisableCacheOnDegrade=1 Port Info [00]: AutoQMode=01 QDepth=31 QMode=NCQ Port Info [01]: AutoQMode=01 QDepth=31 QMode=NCQ Port Info [02]: AutoQMode=01 QDepth=31 QMode=NCQ Port Info [03]: AutoQMode=01 QDepth=31 QMode=NCQ Replay done, D=0x0, P=0x0 AMI Assoc. Slots: AMI 907x enclosure not present. DcbMgr::WriteSegment(map=0x4B8FB0, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B8FB0, segID=0x33, events=8, error=0x0) InitConnect credits: 256 DcbMgr::WriteSegment(map=0x4B7D98, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 00:00:10) DcbMgr::WriteSegment(map=0x4B7DF0, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 00:00:10) features: 0x00000003 Driver Firmware SRL 0x0025 0x0024 ArchId 0x0000 0x0006 Branch 0x0004 0x0000 Build 0x0046 0x009B Result 0x00000002 64 bit SGL format Start unit 0x0 Time : 00:00:10 Rollcall, Begin : find drives Inventory done, port=0 Inventory done, port=1 Inventory done, port=2 Inventory done, port=3 Associate slots: Rollcall, Waiting to start DCB read --PortHandle[ 0] DriveHandle[ 0] phy: 0 DIT status: DRV_PRESENT (0xFF) Drv type: SATA Direct Model #: WDC WD15EADS-00P8B0 Serial #: WD-WMAVU049xxxx Drv FW #: 01.00A01 Capacity: 2930277168 (0x00000000AEA87B30) drv ports: Supported 1, Connected : 1 WWN: 50014ee001aa0a82 sasAddr: 0000000000000000 Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1, SCTWriteSame: 1 Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1 Acoustic: 0xFE, def=0x80 (0xFE=best performance) Security: Status=0x21 (disabled, unlocked) DMA TCQ: 0 ++ SATA NCQ: 1 Pwr Cycles: 1163, Realloc Sct: 0, Temp (°C): 23 Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs) Spndle Spd: 5400 --PortHandle[ 1] DriveHandle[ 1] phy: 1 DIT status: DRV_PRESENT (0xFF) Drv type: SATA Direct Model #: WDC WD15EADS-00P8B0 Serial #: WD-WMAVU032xxxx Drv FW #: 01.00A01 Capacity: 2930277168 (0x00000000AEA87B30) drv ports: Supported 1, Connected : 1 WWN: 50014ee0ac47f9fe sasAddr: 0000000000000001 Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1, SCTWriteSame: 1 Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1 Acoustic: 0xFE, def=0x80 (0xFE=best performance) Security: Status=0x21 (disabled, unlocked) DMA TCQ: 0 ++ SATA NCQ: 1 Pwr Cycles: 1159, Realloc Sct: 0, Temp (°C): 22 Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs) Spndle Spd: 5400 --PortHandle[ 2] DriveHandle[ 2] phy: 2 DIT status: DRV_PRESENT (0xFF) Drv type: SATA Direct Model #: WDC WD15EADS-00P8B0 Serial #: WD-WMAVU047xxxx Drv FW #: 01.00A01 Capacity: 2930277168 (0x00000000AEA87B30) drv ports: Supported 1, Connected : 1 WWN: 50014ee0ac54d08a sasAddr: 0000000000000002 Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1, SCTWriteSame: 1 Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1 Acoustic: 0xFE, def=0x80 (0xFE=best performance) Security: Status=0x21 (disabled, unlocked) DMA TCQ: 0 ++ SATA NCQ: 1 Pwr Cycles: 1163, Realloc Sct: 0, Temp (°C): 23 Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs) Spndle Spd: 5400 --PortHandle[ 3] DriveHandle[ 3] phy: 3 DIT status: DRV_PRESENT (0xFF) Drv type: SATA Direct Model #: WDC WD15EADS-00P8B0 Serial #: WD-WMAVU048xxxx Drv FW #: 01.00A01 Capacity: 2930277168 (0x00000000AEA87B30) drv ports: Supported 1, Connected : 1 WWN: 50014ee0ac54a2b2 sasAddr: 0000000000000003 Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1, SCTWriteSame: 1 Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1 Acoustic: 0xFE, def=0x80 (0xFE=best performance) Security: Status=0x21 (disabled, unlocked) DMA TCQ: 0 ++ SATA NCQ: 1 Pwr Cycles: 1145, Realloc Sct: 0, Temp (°C): 23 Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs) Spndle Spd: 5400 EVPD pg 0h EVPD pg 80h EVPD pg 83h ReportLuns Cmd, Unit 0 LUN # 0 added Send AEN (code, time): 0x31, 01/01/1970 00:01:00 Synchronize host/controller time (EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71) AutoSpare check... SELF TEST: all tests completed. Unit 0 A-Verifier STARTED Stripelet Size=64k, parities=1 NumActBins=2048, StripesPerBin=11176 Verify RAID5 (80) cap: 8788998144 (task: 0%) (Unclean=0) CBOD (0)[0] cap: 2929666048 (lbaOff 0) CBOD (1)[1] cap: 2929666048 (lbaOff 0) CBOD (2)[2] cap: 2929666048 (lbaOff 0) CBOD (3)[3] cap: 2929666048 (lbaOff 0) Send AEN (code, time): 0x29, 09/14/2011 11:16:03 Verify started (EC:0x29, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=03, Type=0x71) unit=0 DcbMgr::WriteSegment(map=0x671544, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 11:16:03) DcbMgr::WriteSegment(map=0x67159C, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 11:16:03) [A:1][A:2][A:3][A:4][A:5][A:6][A:7] [A:8][A:9][A:a][A:b][A:c][A:d][A:e][A:f] DcbMgr::WriteSegment(map=0x671544, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 11:52:08) DcbMgr::WriteSegment(map=0x67159C, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 11:52:08) [A:10][A:11]DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7CB8, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 11:57:33) DcbMgr::WriteSegment(map=0x4B7D10, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 11:57:33) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) Auto Clean: 0 DcbMgr::WriteSegment(map=0x4C0238, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 11:59:13) DcbMgr::WriteSegment(map=0x4C0290, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 11:59:13) DcbMgr::WriteSegment(map=0x4C02B8, segID=0x32, events=8, error=0x0) [A:12][A:13][A:14]Send AEN (code, time): 0x31, 09/14/2011 12:05:03 Synchronize host/controller time (EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71) [A:15][A:16][A:17] [A:18][A:19][A:1a][A:1b][A:1c][A:1d][A:1e][A:1f] DcbMgr::WriteSegment(map=0x671544, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 12:29:43) DcbMgr::WriteSegment(map=0x67159C, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 12:29:43) [A:20][A:21][A:22][A:23][A:24][A:25][A:26][A:27] [A:28][A:29][A:2a]Send AEN (code, time): 0x31, 09/14/2011 12:55:03 Synchronize host/controller time (EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71) [A:2b][A:2c][A:2d]DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7CB8, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 13:01:53) DcbMgr::WriteSegment(map=0x4B7D10, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 13:01:53) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) [A:2e]Auto Clean: 0 DcbMgr::WriteSegment(map=0x4C0238, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 13:05:13) DcbMgr::WriteSegment(map=0x4C0290, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 13:05:13) DcbMgr::WriteSegment(map=0x4C02B8, segID=0x32, events=8, error=0x0) [A:2f] DcbMgr::WriteSegment(map=0x671544, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 13:06:58) DcbMgr::WriteSegment(map=0x67159C, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 13:06:58) [A:30][A:31][A:32][A:33][A:34][A:35][A:36][A:37] [A:38][A:39]DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7CB8, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 13:31:33) DcbMgr::WriteSegment(map=0x4B7D10, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 13:31:33) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) Auto Clean: 0 DcbMgr::WriteSegment(map=0x4C0238, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 13:33:33) DcbMgr::WriteSegment(map=0x4C0290, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 13:33:33) DcbMgr::WriteSegment(map=0x4C02B8, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7CB8, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 13:34:08) DcbMgr::WriteSegment(map=0x4B7D10, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 13:34:08) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) [A:3a]DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) Auto Clean: 0 DcbMgr::WriteSegment(map=0x4C0238, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 13:36:08) DcbMgr::WriteSegment(map=0x4C0290, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 13:36:08) DcbMgr::WriteSegment(map=0x4C02B8, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7CB8, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 13:37:03) DcbMgr::WriteSegment(map=0x4B7D10, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 13:37:03) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) [A:3b]DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) Auto Clean: 0 DcbMgr::WriteSegment(map=0x4C0238, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 13:38:33) DcbMgr::WriteSegment(map=0x4C0290, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 13:38:33) DcbMgr::WriteSegment(map=0x4C02B8, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7CB8, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 13:39:33) DcbMgr::WriteSegment(map=0x4B7D10, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 13:39:33) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) InitConnect credits: 1 Updating cache settings for unit: 0 DcbMgr::WriteSegment(map=0x4C7620, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 13:39:38) DcbMgr::WriteSegment(map=0x4C7678, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 13:39:38) Unit 0 A-Verifier STOPPED Auto Clean: 0 DcbMgr::WriteSegment(map=0x4C0238, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 13:39:38) DcbMgr::WriteSegment(map=0x4C0290, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 13:39:38) DcbMgr::WriteSegment(map=0x4C02B8, segID=0x32, events=8, error=0x0) features: 0x00000001 64 bit SGL format InitConnect credits: 1 features: 0x00000001 64 bit SGL format Power state interrupt 0x00 Time : ..power settle (pre-rollcall) pause.. EPCT file not found in flash. Auto detecting enclosures ... E=1018 T=00:00:00 : Drive add P=0h: Drive add confirmed Inventory done, port=0 Assigning drive handle 0 to port 0 Associate slots: E=1018 T=00:00:00 : Drive add P=1h: Drive add confirmed Inventory done, port=1 Assigning drive handle 1 to port 1 Associate slots: E=1018 T=00:00:00 : Drive add P=2h: Drive add confirmed Inventory done, port=2 Assigning drive handle 2 to port 2 Associate slots: E=1018 T=00:00:05 : Drive add P=3h: Drive add confirmed Inventory done, port=3 Assigning drive handle 3 to port 3 Associate slots: Rollcall, Begin : find drives Rollcall, Waiting to start DCB read --PortHandle[ 0] DriveHandle[ 0] phy: 0 DIT status: DRV_PRESENT (0xFF) Drv type: SATA Direct Model #: WDC WD15EADS-00P8B0 Serial #: WD-WMAVU049xxxx Drv FW #: 01.00A01 Capacity: 2930277168 (0x00000000AEA87B30) drv ports: Supported 1, Connected : 1 WWN: 50014ee001aa0a82 sasAddr: 0000000000000000 Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1, SCTWriteSame: 1 Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1 Acoustic: 0xFE, def=0x80 (0xFE=best performance) Security: Status=0x21 (disabled, unlocked) DMA TCQ: 0 ++ SATA NCQ: 1 Pwr Cycles: 1163, Realloc Sct: 0, Temp (°C): 33 Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs) Spndle Spd: 5400 --PortHandle[ 1] DriveHandle[ 1] phy: 1 DIT status: DRV_PRESENT (0xFF) Drv type: SATA Direct Model #: WDC WD15EADS-00P8B0 Serial #: WD-WMAVU032xxxx Drv FW #: 01.00A01 Capacity: 2930277168 (0x00000000AEA87B30) drv ports: Supported 1, Connected : 1 WWN: 50014ee0ac47f9fe sasAddr: 0000000000000001 Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1, SCTWriteSame: 1 Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1 Acoustic: 0xFE, def=0x80 (0xFE=best performance) Security: Status=0x21 (disabled, unlocked) DMA TCQ: 0 ++ SATA NCQ: 1 Pwr Cycles: 1159, Realloc Sct: 0, Temp (°C): 32 Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs) Spndle Spd: 5400 --PortHandle[ 2] DriveHandle[ 2] phy: 2 DIT status: DRV_PRESENT (0xFF) Drv type: SATA Direct Model #: WDC WD15EADS-00P8B0 Serial #: WD-WMAVU047xxxx Drv FW #: 01.00A01 Capacity: 2930277168 (0x00000000AEA87B30) drv ports: Supported 1, Connected : 1 WWN: 50014ee0ac54d08a sasAddr: 0000000000000002 Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1, SCTWriteSame: 1 Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1 Acoustic: 0xFE, def=0x80 (0xFE=best performance) Security: Status=0x21 (disabled, unlocked) DMA TCQ: 0 ++ SATA NCQ: 1 Pwr Cycles: 1163, Realloc Sct: 0, Temp (°C): 33 Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs) Spndle Spd: 5400 --PortHandle[ 3] DriveHandle[ 3] phy: 3 DIT status: DRV_PRESENT (0xFF) Drv type: SATA Direct Model #: WDC WD15EADS-00P8B0 Serial #: WD-WMAVU048xxxx Drv FW #: 01.00A01 Capacity: 2930277168 (0x00000000AEA87B30) drv ports: Supported 1, Connected : 1 WWN: 50014ee0ac54a2b2 sasAddr: 0000000000000003 Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1, SCTWriteSame: 1 Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1 Acoustic: 0xFE, def=0x80 (0xFE=best performance) Security: Status=0x21 (disabled, unlocked) DMA TCQ: 0 ++ SATA NCQ: 1 Pwr Cycles: 1145, Realloc Sct: 0, Temp (°C): 32 Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs) Spndle Spd: 5400 Rollcall, middle : check DCBs, export JBODs port 0: Valid DCB port 1: Valid DCB port 2: Valid DCB port 3: Valid DCB Rollcall, finish : make RAID Units Num Bins = 2048 : Sectors Per Bin = 4291584 Re-numbering units: (there are 1 valid units) rank # 0x: 0 FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF old unit#: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 new unit#: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 SETTINGS: Distributing UNIT 0 parameters (count=9, bytes=166) Port Info [00]: AutoQMode=01 QDepth=31 QMode=NCQ Port Info [01]: AutoQMode=01 QDepth=31 QMode=NCQ Port Info [02]: AutoQMode=01 QDepth=31 QMode=NCQ Port Info [03]: AutoQMode=01 QDepth=31 QMode=NCQ Updating cache settings for unit: 0 UNIT: 0 (Data) is ONline SCTWriteSame=1, FastRebuild=1, fastVerify=1 Stripelet Size=64k, parities=1 NumActBins=2048, StripesPerBin=11176 Verify RAID5 (80) cap: 8788998144 (task: 46%) (Unclean=0) CBOD (0)[0] cap: 2929666048 (lbaOff 0) CBOD (1)[1] cap: 2929666048 (lbaOff 0) CBOD (2)[2] cap: 2929666048 (lbaOff 0) CBOD (3)[3] cap: 2929666048 (lbaOff 0) LUN 0x0 Start LBA 0x0 Size 0x20bdd7800 Cache Settings: WCE=0 - (ForceDriveCacheOn=0) - RCD=0 IgnoreFua=0, WriteJournaling=1, DisableCacheOnDegrade=1 Port Info [00]: AutoQMode=01 QDepth=31 QMode=NCQ Port Info [01]: AutoQMode=01 QDepth=31 QMode=NCQ Port Info [02]: AutoQMode=01 QDepth=31 QMode=NCQ Port Info [03]: AutoQMode=01 QDepth=31 QMode=NCQ Replay done, D=0x0, P=0x0 AMI Assoc. Slots: AMI 907x enclosure not present. DcbMgr::WriteSegment(map=0x4B8FB0, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B8FB0, segID=0x33, events=8, error=0x0) InitConnect credits: 0 features: 0x00000000 32 bit SGL format BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while reading packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted InitConnect credits: 256 DcbMgr::WriteSegment(map=0x4B7D98, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 13:40:33) DcbMgr::WriteSegment(map=0x4B7DF0, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 13:40:33) features: 0x00000003 Driver Firmware SRL 0x0025 0x0024 ArchId 0x0000 0x0006 Branch 0x0004 0x0000 Build 0x0046 0x009B Result 0x00000002 64 bit SGL format EVPD pg 0h EVPD pg 80h EVPD pg 83h ReportLuns Cmd, Unit 0 LUN # 0 added Send AEN (code, time): 0x31, 09/14/2011 13:40:48 Synchronize host/controller time (EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7CB8, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 13:40:45) DcbMgr::WriteSegment(map=0x4B7D10, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 13:40:45) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) AutoSpare check... SELF TEST: all tests completed. Unit 0 A-Verifier STARTED Stripelet Size=64k, parities=1 NumActBins=2048, StripesPerBin=11176 Verify RAID5 (80) cap: 8788998144 (task: 46%) (Unclean=1) CBOD (0)[0] cap: 2929666048 (lbaOff 0) CBOD (1)[1] cap: 2929666048 (lbaOff 0) CBOD (2)[2] cap: 2929666048 (lbaOff 0) CBOD (3)[3] cap: 2929666048 (lbaOff 0) Send AEN (code, time): 0x29, 09/14/2011 13:41:45 Verify started (EC:0x29, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=03, Type=0x71) unit=0 DcbMgr::WriteSegment(map=0x671544, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 13:41:45) DcbMgr::WriteSegment(map=0x67159C, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 13:41:45) Auto Clean: 0 DcbMgr::WriteSegment(map=0x4C0238, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 13:42:00) DcbMgr::WriteSegment(map=0x4C0290, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 13:42:00) DcbMgr::WriteSegment(map=0x4C02B8, segID=0x32, events=8, error=0x0) [A:3c][A:3d][A:3e][A:3f][A:40][A:41][A:42] [A:43][A:44][A:45][A:46][A:47][A:48][A:49][A:4a] DcbMgr::WriteSegment(map=0x671544, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 14:26:20) DcbMgr::WriteSegment(map=0x67159C, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 14:26:20) [A:4b]Send AEN (code, time): 0x31, 09/14/2011 14:30:45 Synchronize host/controller time (EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71) [A:4c]DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7CB8, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 14:36:35) DcbMgr::WriteSegment(map=0x4B7D10, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 14:36:35) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) [A:4d]DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) Auto Clean: 0 DcbMgr::WriteSegment(map=0x4C0238, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 14:37:50) DcbMgr::WriteSegment(map=0x4C0290, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 14:37:50) DcbMgr::WriteSegment(map=0x4C02B8, segID=0x32, events=8, error=0x0) [A:4e][A:4f][A:50][A:51][A:52] [A:53][A:54]DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7CB8, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 14:59:45) DcbMgr::WriteSegment(map=0x4B7D10, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 14:59:45) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=8, error=0x0) [A:55]Auto Clean: 0 DcbMgr::WriteSegment(map=0x4C0238, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 15:01:45) DcbMgr::WriteSegment(map=0x4C0290, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 15:01:45) DcbMgr::WriteSegment(map=0x4C02B8, segID=0x32, events=8, error=0x0) [A:56][A:57][A:58][A:59][A:5a] DcbMgr::WriteSegment(map=0x671544, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 15:16:35) DcbMgr::WriteSegment(map=0x67159C, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 15:16:35) [A:5b]Send AEN (code, time): 0x31, 09/14/2011 15:20:45 Synchronize host/controller time (EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71) [A:5c][A:5d][A:5e][A:5f][A:60][A:61][A:62] [A:63][A:64][A:65][A:66][A:67][A:68]Send AEN (code, time): 0x31, 09/14/2011 16:10:45 Synchronize host/controller time (EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71) [A:69][A:6a] DcbMgr::WriteSegment(map=0x671544, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 16:15:55) DcbMgr::WriteSegment(map=0x67159C, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 16:15:55) [A:6b] E=0202 T=16:20:00 : Data ECC error (int) task file written out : cd dh ch cl sn sc ft : 60 D2 2D D6 80 80 80 E=0202 T=16:20:00 P=0 : Soft reset drive E=0207 T=16:20:00 P=0 : ResetDriveWait E=0207 T=16:20:00 P=0 : ResetDriveWait E=0202 T=16:20:00 P=0 : Inserting Set UDMA command E=0202 T=16:20:00 P=0h: Repair LBA 0x922dd68b...OK E=0202 T=16:20:00 P=0h: Repair LBA 0x922dd68c...OK E=0202 T=16:20:00 P=0h: Repair LBA 0x922dd68d...OK Send AEN (code, time): 0x23, 09/14/2011 16:20:00 Sector repair completed (EC:0x23, SK=0x01, ASC=0x11, ASCQ=0x00, SEV=02, Type=0x71) port=0, LBA=0x922DD68C E=0202 T=16:20:00 P=0h: Complete IPRs in error A-Verifier ERROR, time: eacae (ErrorCode): 202 Start Stripe #: 01245bad BBU status word : 0x0 -------------------------------------------------------------------------- //QuadPC/c0 Controller Log Information ... -------------------------------------------------------------------------- ..power settle (pre-rollcall) pause.. EPCT file not found in flash. Auto detecting enclosures ... E=1018 T=00:00:00 : Drive add P=0h: Drive add confirmed E=1018 T=00:00:00 : Drive add P=1h: Drive add confirmed E=1018 T=00:00:05 : Drive add P=2h: Drive add confirmed E=1018 T=00:00:05 : Drive add P=3h: Drive add confirmed Inventory done, port=2 Inventory done, port=0 Inventory done, port=1 Inventory done, port=3 Assigning drive handle 0 to port 0 Assigning drive handle 1 to port 1 Assigning drive handle 2 to port 2 Assigning drive handle 3 to port 3 Associate slots: Rollcall, Begin : find drives Rollcall, Waiting to start DCB read --PortHandle[ 0] DriveHandle[ 0] phy: 0 DIT status: DRV_PRESENT (0xFF) Drv type: SATA Direct Model #: WDC WD15EADS-00P8B0 Serial #: WD-WCAVU024xxxx Drv FW #: 01.00A01 Capacity: 2930277168 (0x00000000AEA87B30) drv ports: Supported 1, Connected : 1 WWN: 50014ee258bf02bc sasAddr: 0000000000000000 Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1, SCTWriteSame: 1 Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1 Acoustic: 0xFE, def=0x80 (0xFE=best performance) Security: Status=0x21 (disabled, unlocked) DMA TCQ: 0 ++ SATA NCQ: 1 Pwr Cycles: 1, Realloc Sct: 0, Temp (°C): 26 Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs) Spndle Spd: 5400 --PortHandle[ 1] DriveHandle[ 1] phy: 1 DIT status: DRV_PRESENT (0xFF) Drv type: SATA Direct Model #: WDC WD15EADS-00P8B0 Serial #: WD-WMAVU032xxxx Drv FW #: 01.00A01 Capacity: 2930277168 (0x00000000AEA87B30) drv ports: Supported 1, Connected : 1 WWN: 50014ee0ac47f9fe sasAddr: 0000000000000001 Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1, SCTWriteSame: 1 Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1 Acoustic: 0xFE, def=0x80 (0xFE=best performance) Security: Status=0x21 (disabled, unlocked) DMA TCQ: 0 ++ SATA NCQ: 1 Pwr Cycles: 1164, Realloc Sct: 0, Temp (°C): 26 Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs) Spndle Spd: 5400 --PortHandle[ 2] DriveHandle[ 2] phy: 2 DIT status: DRV_PRESENT (0xFF) Drv type: SATA Direct Model #: WDC WD15EADS-00P8B0 Serial #: WD-WMAVU047xxxx Drv FW #: 01.00A01 Capacity: 2930277168 (0x00000000AEA87B30) drv ports: Supported 1, Connected : 1 WWN: 50014ee0ac54d08a sasAddr: 0000000000000002 Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1, SCTWriteSame: 1 Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1 Acoustic: 0xFE, def=0x80 (0xFE=best performance) Security: Status=0x21 (disabled, unlocked) DMA TCQ: 0 ++ SATA NCQ: 1 Pwr Cycles: 1168, Realloc Sct: 0, Temp (°C): 27 Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs) Spndle Spd: 5400 --PortHandle[ 3] DriveHandle[ 3] phy: 3 DIT status: DRV_PRESENT (0xFF) Drv type: SATA Direct Model #: WDC WD15EADS-00P8B0 Serial #: WD-WMAVU048xxxx Drv FW #: 01.00A01 Capacity: 2930277168 (0x00000000AEA87B30) drv ports: Supported 1, Connected : 1 WWN: 50014ee0ac54a2b2 sasAddr: 0000000000000003 Features: SMART: 1, Security: 1, 48-bit addr: 1, Acoustic: 1, SCTWriteSame: 1 Feat. Ext: TimeLimited R/W: 0, WDMA FUA: 0, Stream: 0, WWN: 1 Acoustic: 0xFE, def=0x80 (0xFE=best performance) Security: Status=0x21 (disabled, unlocked) DMA TCQ: 0 ++ SATA NCQ: 1 Pwr Cycles: 1150, Realloc Sct: 0, Temp (°C): 26 Link Speed: Supported=0x3 (1.5 Gbs to 3.0 Gbs) Current=0x2 (3.0 Gbs) Spndle Spd: 0 Rollcall, middle : check DCBs, export JBODs port 0: No DCB (JBOD) port 1: Valid DCB port 2: Valid DCB port 3: Valid DCB Rollcall, finish : make RAID Units Num Bins = 2048 : Sectors Per Bin = 4291584 Re-numbering units: (there are 1 valid units) rank # 0x: 0 FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF FFF old unit#: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 new unit#: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 SETTINGS: Distributing UNIT 0 parameters (count=9, bytes=166) Port Info [01]: AutoQMode=01 QDepth=31 QMode=NCQ Port Info [02]: AutoQMode=01 QDepth=31 QMode=NCQ Port Info [03]: AutoQMode=01 QDepth=31 QMode=NCQ Updating cache settings for unit: 0 UNIT: 0 (Data) is ONline SCTWriteSame=1, FastRebuild=1, fastVerify=1 Stripelet Size=64k, parities=1 NumActBins=2048, StripesPerBin=11176 Degrade RAID5 (80) cap: 8788998144 (task: 0%) (Unclean=0) d> CBOD (0)[-1] cap: 2929666048 (lbaOff 0) CBOD (1)[1] cap: 2929666048 (lbaOff 0) CBOD (2)[2] cap: 2929666048 (lbaOff 0) CBOD (3)[3] cap: 2929666048 (lbaOff 0) LUN 0x0 Start LBA 0x0 Size 0x20bdd7800 Cache Settings: WCE=0 - (ForceDriveCacheOn=0) - RCD=0 IgnoreFua=0, WriteJournaling=1, DisableCacheOnDegrade=1 Port Info [01]: AutoQMode=01 QDepth=31 QMode=NCQ Port Info [02]: AutoQMode=01 QDepth=31 QMode=NCQ Port Info [03]: AutoQMode=01 QDepth=31 QMode=NCQ Replay done, D=0x0, P=0x0 AMI Assoc. Slots: AMI 907x enclosure not present. DcbMgr::WriteSegment(map=0x4B8FB0, segID=0x32, events=6, error=0x0) DcbMgr::WriteSegment(map=0x4B8FB0, segID=0x33, events=6, error=0x0) InitConnect credits: 0 features: 0x00000000 32 bit SGL format BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while reading packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while reading packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted InitConnect credits: 256 DcbMgr::WriteSegment(map=0x4B7D98, segID=0x33, events=6, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 00:32:31) DcbMgr::WriteSegment(map=0x4B7DF0, segID=0x8, events=6, error=0x0) DcbMgr::UpdateStatus: (finish 00:32:31) Send AEN (code, time): 0x6, 09/16/2011 00:32:31 Incomplete unit detected (EC:0x06, SK=0x00, ASC=0x6b, ASCQ=0x02, SEV=02, Type=0x71) unit=0 features: 0x00000003 Driver Firmware SRL 0x0025 0x0024 ArchId 0x0000 0x0006 Branch 0x0004 0x0000 Build 0x0046 0x009B Result 0x00000002 64 bit SGL format EVPD pg 0h EVPD pg 80h EVPD pg 83h ReportLuns Cmd, Unit 0 LUN # 0 added DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=6, error=0x0) DcbMgr::WriteSegment(map=0x4B7CB8, segID=0x33, events=6, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 00:32:46) DcbMgr::WriteSegment(map=0x4B7D10, segID=0x8, events=6, error=0x0) DcbMgr::UpdateStatus: (finish 00:32:46) DcbMgr::WriteSegment(map=0x4B7CA0, segID=0x33, events=6, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 00:32:46) DcbMgr::WriteSegment(map=0x4B7CF8, segID=0x8, events=6, error=0x0) DcbMgr::UpdateStatus: (finish 00:32:46) Send AEN (code, time): 0x31, 09/16/2011 00:32:51 Synchronize host/controller time (EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=6, error=0x0) DcbMgr::WriteSegment(map=0x4B7E18, segID=0x32, events=6, error=0x0) AutoSpare check... No Replacement list to sort (1)! 1 drive only! No Replacement list to sort (4)! 1 drive only! No Replacement list to sort (5)! 1 drive only! driveHandle=0 Cap=0xAEA87B30 DcbMgr::UpdateArray: UNIT 0 (time 00:33:28) DcbMgr::WriteSegment(map=0x4BF3D8, segID=0xF, events=2, error=0x0) DcbMgr::WriteSegment(map=0x4BF420, segID=0x2, events=6, error=0x0) DcbMgr::WriteSegment(map=0x4BF3D8, segID=0xF, events=6, error=0x0) DcbMgr::UpdateArray: (finish 00:33:28) DcbMgr::WriteSegment(map=0x4BF478, segID=0x32, events=8, error=0x0) DcbMgr::WriteSegment(map=0x4BF478, segID=0x33, events=8, error=0x0) UNIT: 0 (Data) is ONline SCTWriteSame=1, FastRebuild=1, fastVerify=1 Stripelet Size=64k, parities=1 NumActBins=2048, StripesPerBin=11176 Rebuild RAID5 (80) cap: 8788998144 (task: 0%) (Unclean=1) r> CBOD (0)[0] cap: 2929666048 (lbaOff 0) CBOD (1)[1] cap: 2929666048 (lbaOff 0) CBOD (2)[2] cap: 2929666048 (lbaOff 0) CBOD (3)[3] cap: 2929666048 (lbaOff 0) LUN 0x0 Start LBA 0x0 Size 0x20bdd7800 Cache Settings: WCE=0 - (ForceDriveCacheOn=0) - RCD=0 IgnoreFua=0, WriteJournaling=1, DisableCacheOnDegrade=1 Port Info [00]: AutoQMode=01 QDepth=31 QMode=NCQ Port Info [01]: AutoQMode=01 QDepth=31 QMode=NCQ Port Info [02]: AutoQMode=01 QDepth=31 QMode=NCQ Port Info [03]: AutoQMode=01 QDepth=31 QMode=NCQ UA:ReplaceUnitPort complete (errorCode): 0 SELF TEST: all tests completed. Unit 0 A-RebuilderRaid5/6 STARTED Stripelet Size=64k, parities=1 NumActBins=2048, StripesPerBin=11176 Rebuild RAID5 (80) cap: 8788998144 (task: 0%) (Unclean=1) r> CBOD (0)[0] cap: 2929666048 (lbaOff 0) CBOD (1)[1] cap: 2929666048 (lbaOff 0) CBOD (2)[2] cap: 2929666048 (lbaOff 0) CBOD (3)[3] cap: 2929666048 (lbaOff 0) Send AEN (code, time): 0xb, 09/16/2011 00:33:48 Rebuild started (EC:0x0b, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=03, Type=0x71) unit=0 DcbMgr::WriteSegment(map=0x66FD34, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 00:33:48) DcbMgr::WriteSegment(map=0x66FD8C, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 00:33:48) Auto Clean: 0 DcbMgr::WriteSegment(map=0x4C0238, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 00:33:58) DcbMgr::WriteSegment(map=0x4C0290, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 00:33:58) DcbMgr::WriteSegment(map=0x4C02B8, segID=0x32, events=8, error=0x0) AutoSpare check... BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted [A:1][A:2]BBU comm error 0x241 while writing packet : I2C transaction aborted SETTINGS: Saving UNIT 0 parameters ... DcbMgr::UpdateSupport: UNIT 0 (time 00:42:08) DcbMgr::WriteSegment(map=0x4B7DD8, segID=0x4, events=8, error=0x0) DcbMgr::UpdateSupport: (finish 00:42:08) done. (count=5, bytes=132) SETTINGS: Saving UNIT 0 parameters ... DcbMgr::UpdateSupport: UNIT 0 (time 00:42:08) DcbMgr::WriteSegment(map=0x4B7DD8, segID=0x4, events=8, error=0x0) DcbMgr::UpdateSupport: (finish 00:42:08) done. (count=6, bytes=139) SETTINGS: Saving UNIT 0 parameters ... DcbMgr::UpdateSupport: UNIT 0 (time 00:42:08) DcbMgr::WriteSegment(map=0x4B7DD8, segID=0x4, events=8, error=0x0) DcbMgr::UpdateSupport: (finish 00:42:08) done. (count=7, bytes=146) BBU comm error 0x241 while writing packet : I2C transaction aborted Enable write cache; not dirty Cache Settings: WCE=1 - RCD=0 IgnoreFua=1, WriteJournaling=0, DisableCacheOnDegrade=0 SETTINGS: Saving UNIT 0 parameters ... DcbMgr::UpdateSupport: UNIT 0 (time 00:42:28) DcbMgr::WriteSegment(map=0x4B7DD8, segID=0x4, events=8, error=0x0) DcbMgr::UpdateSupport: (finish 00:42:28) done. (count=8, bytes=152) BBU comm error 0x241 while writing packet : I2C transaction aborted [A:3]Send AEN (code, time): 0x31, 09/16/2011 01:22:48 Synchronize host/controller time (EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71) [A:4][A:5]Send AEN (code, time): 0x31, 09/16/2011 02:12:48 Synchronize host/controller time (EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71) [A:6]Send AEN (code, time): 0x31, 09/16/2011 03:02:48 Synchronize host/controller time (EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71) [A:7] [A:8][A:9][A:a][A:b]Send AEN (code, time): 0x31, 09/16/2011 03:52:48 Synchronize host/controller time (EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71) [A:c][A:d][A:e][A:f] DcbMgr::WriteSegment(map=0x66FD34, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 04:36:03) DcbMgr::WriteSegment(map=0x66FD8C, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 04:36:03) [A:10][A:11][A:12]Send AEN (code, time): 0x31, 09/16/2011 04:42:48 Synchronize host/controller time (EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71) [A:13][A:14][A:15][A:16][A:17] [A:18][A:19][A:1a][A:1b][A:1c][A:1d][A:1e][A:1f] DcbMgr::WriteSegment(map=0x66FD34, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 05:10:13) DcbMgr::WriteSegment(map=0x66FD8C, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 05:10:13) [A:20][A:21][A:22][A:23][A:24][A:25][A:26][A:27] [A:28][A:29]Send AEN (code, time): 0x31, 09/16/2011 05:32:48 Synchronize host/controller time (EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71) [A:2a][A:2b][A:2c][A:2d][A:2e][A:2f] DcbMgr::WriteSegment(map=0x66FD34, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 05:46:38) DcbMgr::WriteSegment(map=0x66FD8C, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 05:46:38) [A:30][A:31][A:32][A:33][A:34][A:35][A:36][A:37] [A:38][A:39][A:3a][A:3b][A:3c][A:3d]Send AEN (code, time): 0x31, 09/16/2011 06:22:48 Synchronize host/controller time (EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71) [A:3e][A:3f] DcbMgr::WriteSegment(map=0x66FD34, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 06:25:38) DcbMgr::WriteSegment(map=0x66FD8C, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 06:25:38) [A:40][A:41][A:42][A:43][A:44][A:45][A:46][A:47] [A:48][A:49][A:4a][A:4b][A:4c][A:4d][A:4e][A:4f] DcbMgr::WriteSegment(map=0x66FD34, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 07:07:28) DcbMgr::WriteSegment(map=0x66FD8C, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 07:07:28) [A:50]Send AEN (code, time): 0x31, 09/16/2011 07:12:48 Synchronize host/controller time (EC:0x31, SK=0x00, ASC=0x00, ASCQ=0x00, SEV=04, Type=0x71) [A:51][A:52][A:53][A:54][A:55][A:56][A:57] [A:58][A:59][A:5a]BBU comm error 0x241 while writing packet : I2C transaction aborted [A:5b]BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted [A:5c]BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted [A:5d][A:5e][A:5f] DcbMgr::WriteSegment(map=0x66FD34, segID=0x33, events=8, error=0x0) DcbMgr::UpdateStatus: UNIT 0 (time 07:53:33) DcbMgr::WriteSegment(map=0x66FD8C, segID=0x8, events=8, error=0x0) DcbMgr::UpdateStatus: (finish 07:53:33) BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted BBU comm error 0x241 while writing packet : I2C transaction aborted [..................looong space..........................]