maxoptimus

Member
  • Content Count

    4
  • Joined

  • Last visited

Community Reputation

0 Neutral

About maxoptimus

  • Rank
    Member
  1. maxoptimus

    Confused about TLER for onboard RAID

    smartmontools 5.41 command --scan -d csmi (appear list of drives) Some like /dev/csmi0,2; /dev/csmi0,3 (according to ports used for raid). http://sourceforge.net/apps/trac/sma...ID-Controllers http://smartmontools-win32.dyndns.org/smartmontools/ I have ASUS p5e X38 ICH9R and scterc work fine. If your drives support ERC set you can make simple script and run it on win boot.
  2. maxoptimus

    TLER / CCTL

    smartmontools 5.41 command --scan -d csmi (appear list of drives) Some like /dev/csmi0,2; /dev/csmi0,3 (according to ports used for raid). or simple scmi0,2... http://sourceforge.net/apps/trac/sma...ID-Controllers http://smartmontools-win32.dyndns.org/smartmontools/ I have ASUS p5e X38 ICH9R and scterc work fine. Can you check if Samsung (after last patch 621878F4EG.zip) support scterc.
  3. maxoptimus

    TLER / CCTL

    Hi how can I try to send 'SMART WRITE LOG, Log Page 0xe0 (command log), the log page needs to contain the correct setting according to ATA-8-ACS' to my st32000641AS for trying enable erc. please help... or it's impossible?
  4. maxoptimus

    3ware 9650SE with WD20EARS drives?

    Hi, first of all someone very lucky man can run any number of desktop HDD in raid 1,10,5 without any problems 3,5 or more years (especialy if run full surface read, write, verify tests). But if at drive appear big bad sector and it don't reallocated fast and TLER/ERC/CCTL time setted to very big I think 99% drive will be drop out from array as bad. (Alos related to raid controler settings, firmware, etc)