Mike Philippens

Member
  • Content Count

    1
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Mike Philippens

  • Rank
    Member
  1. Mike Philippens

    TLER / CCTL

    A couple of pages ago, some were trying to get this to work with a Samsung 2Tb 3FEG disk. This gave me hope because my new RAID5 array is giving me a major headache by crashing on me now and then. My best guess is that it has to do with the dreaded CCTL issue. My setup is as follows: Ubuntu 10 box with an AMD Athlon X4 CPU and HighPoint RocketRaid 2680 card with 6 Samsung 3FEG disks attached in RAID5 (through the card, not software raid). The disks are visible to the OS a one volume, mounted on /dev/sdd. This is what I do: smartctl -a -d hpt,1/1 /dev/sdd Reply: (I cut the less interesting part out) smartctl 5.40 2010-02-03 r3060 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: SAMSUNG HD203WI Serial Number: S1UYJ1YZ601160 Firmware Version: 1AN10003 User Capacity: 2,000,398,934,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 6 Local Time is: Mon Nov 15 00:40:34 2010 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED {CUT} SCT capabilities: (0x003f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 5 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0 3 Spin_Up_Time 0x0023 060 060 025 Pre-fail Always - 12156 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 36 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 885 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 58 191 G-Sense_Error_Rate 0x0022 252 252 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0 194 Temperature_Celsius 0x0002 064 064 000 Old_age Always - 28 (Lifetime Min/Max 19/32) 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 0 223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0 225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 3634 SMART Error Log Version: 1 No Errors Logged {CUT} When I try to incorporate the scterc parameter somewhere (where I think it should go) in the command line, it barfs: sudo smartctl -d sat -l scterc -a -d hpt,1/1 /dev/sdd smartctl 5.40 2010-02-03 r3060 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net =======> INVALID ARGUMENT TO -l: scterc =======> VALID ARGUMENTS ARE: error, selftest, selective, directory[,g|s], background, scttemp[sts|hist], sasphy[,reset], sataphy[,reset], gplog,N[,RANGE], smartlog,N[,RANGE], xerror[,N][,error], xselftest[,N][,selftest] <======= Use smartctl -h to get a usage summary Any ideas? It's a pitty the Samsung doesn't seem to hold the setting over a power cycle. I could 'program' the disks on another machine...