Flintz

Member
  • Content Count

    27
  • Joined

  • Last visited

Everything posted by Flintz

  1. My card runs a little hot here, but thats not really suprising with 32 degress roomtemperature and around 42-45 degrees case temperature, I will mount a little 40mm fand on it which I can control. But thats not the reason I am posting here, I have some problems with the Webpam: I am running Gentoo on a 64bit environment and somehow I can only get Webpam to work right after installation If I reboot and try to activate it again I have no luck and just get some error messages. Has anyone figured out how to run Webpam in 64bit linux?
  2. I also have problems compiling the open-source driver from promise (open source version 2.9.0.10 on an AMD64 gentoo linux with 64bit kernel, latest BIOS for the EX8350) this is the error I receive: tresor shasta # make KERNEL_SOURCE_DIR=/usr/src/linux make V=1 CC=cc LD=ld ARCH=i386 -C /usr/src/linux SUBDIRS=`pwd` modules make[1]: Entering directory `/usr/src/linux-2.6.15-gentoo-r5' mkdir -p /root/shasta/.tmp_versions make -f scripts/Makefile.build obj=/root/shasta cc -Wp,-MD,/root/shasta/.shasta.o.d -nostdinc -isystem /usr/lib/gcc/x86_64-pc-linux-gnu/3.4.5/include -D__KERNEL__ -Iinclude -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -Os -fomit-frame-pointer -pipe -msoft-float -fno-unit-at-a-time -march=k8 -Iinclude/asm-i386/mach-default -Wdeclaration-after-statement -D_LINUXDRIVER -D_MMMAP_ -DMOONFANG -D_X8632B -D_32BPLATFORM -I/usr/src/linux/include -I/usr/src/linux/drivers/scsi -I/usr/src/linux/include -I/usr/src/linux/drivers/scsi -DMODULE -DKBUILD_BASENAME=shasta -DKBUILD_MODNAME=shasta -c -o /root/shasta/shasta.o /root/shasta/shasta.c Building modules, stage 2. make -rR -f /usr/src/linux-2.6.15-gentoo-r5/scripts/Makefile.modpost scripts/mod/modpost -i /usr/src/linux-2.6.15-gentoo-r5/Module.symvers vmlinux /root/shasta/shasta.o cc -Wp,-MD,/root/shasta/.shasta.mod.o.d -nostdinc -isystem /usr/lib/gcc/x86_64-pc-linux-gnu/3.4.5/include -D__KERNEL__ -Iinclude -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -Os -fomit-frame-pointer -pipe -msoft-float -fno-unit-at-a-time -march=k8 -Iinclude/asm-i386/mach-default -Wdeclaration-after-statement -DKBUILD_BASENAME=shasta -DKBUILD_MODNAME=shasta -DMODULE -c -o /root/shasta/shasta.mod.o /root/shasta/shasta.mod.c ld -m elf_i386 -r -o /root/shasta/shasta.ko /root/shasta/shasta.o /root/shasta/shasta.mod.o ld: Relocatable linking with relocations from format elf64-x86-64 (/root/shasta/shasta.o) to format elf32-i386 (/root/shasta/shasta.ko) is not supported make[2]: *** [/root/shasta/shasta.ko] Fehler 1 make[1]: *** [modules] Fehler 2 make[1]: Leaving directory `/usr/src/linux-2.6.15-gentoo-r5' make: *** [default] Fehler 2 Seems like it's not recognizing the 64 bit environment? Any ideas anyone?
  3. I AM GOING CRAZY, sorry, but everytime my WinXP crashes i can't boot after a reboot. Sometimes the registry is damaged, sometimes a file called hal.dll is corrput and everytime I get lots of errors on my harddrive. I have 2 WD400BB on a HPT37ß raid-chip onboard (but not in raid-0, they are just running as normales harddrives). I really don't know why this happens, even the old Win98 was able to boot after a crash. The harddrives are physically ok, I checked them with Spinrite. Please post any ideas u have, why this happens.
  4. Hi, I have a Promise Ultra100-TX2 IDE controller (which I don't need, at least not as an IDE controller). I heard that some of the promise IDE controller can be modified that they are RAID controller. Is this possible with my controller? If someone has a step-by-step site please post it. Thanks in advance
  5. I have to add something: The drive didn't stay at 49° but went up to 55° (I formatted a big 50 GB partition). After that I was a bit worried and removed the HD tray opened it and touched the cuda....OUCH that thing was damn hot...after that I think it's smarter to put the driver somwhere else but in this tray... but still thanks for your fast reply
  6. I have a little question for u guys. I have a Cuda IV in a non extra cooled removable HD tray (it's quite tight in there). As I mentionend no fan ist blowing or sucking air in/out of this tray. Now I downloaded HDDTemperature and it gaves me 49°C of the Cuda IV under load. Is that too high or ok? And please don't say that lower temps result in longer life for the drive thats clear I just want to know whether the drive can stand such temps or if I have to change something.
  7. Flintz

    WinXP not bootable after crash

    Ok, I tested my RAM for 18 hours with Memtest 3.0 in extended test mode now, now errors so far. I found two identical 10 GB IBM drives and will try them soon. Another idea i had was that maybe my northbridge gets too hot (it only has a passive heatsink), what do u think?
  8. Flintz

    WinXP not bootable after crash

    It passed 12 tests without an error, but only for 3-4 hours...maybe I run it again for 12 hours or more, but I currently havent got so much time. My Specs: P4 2GHz Northwood Abit TH7-II Raid (HPT 370 onboard chip) 1 GB RDRAM (4x256MB Kingston modules) 2xWD400BB 40 GB 7200 RPM, 1xIBM 30 GB 7200 RPM GeForce4 Ti4200 Soundblaster Audigy Player Intel 100 Ethernet card
  9. Flintz

    WinXP not bootable after crash

    I am currently testing my memory, but I am 99% sure that the memory is ok....I spoke with someone who had EXACTLY the same issue and he said, after he went back to Win2000 everthing was fine again.... But now I am curious about which XP version has this issue. He and I both used WinXP Prof. Corporate Version. Now I wonder if the normal Prof. or Home has the same problem.....
  10. Flintz

    WinXP not bootable after crash

    Did I say I had luck? Hmpf, yes the szstem ran well but today I wanna start my szstem, and what happens??? My registry is damaged again... Thats probably the point, maybe I will try to connec the drives to the normal IDE controller.
  11. Flintz

    WinXP not bootable after crash

    This time I had luck, I ran NTFSDOS and ran ntfschk, it could repair all errors (and there were much errors, about 30-50....) after that my PC booted normally again, but the times before I didn't had that much luck...is XP really so easily "broken"? Or is it something with my setup
  12. Hi, does anybody of you know a good test program for harddrives which support raid-0 setups? The program should test whether all data written to the drive(partition) is correct, just a simply test program. Thanks in advance
  13. The problem is, that I have the "WINDOWSSYSTEM32CONFIGSYSTEM is missing or corrupt" a few times in the last weeks on my WinXP machine, and I read that either bad memory (which I don't think is my problem, because normally my system is really stable, no crashes at all) or bad harddrive. Now I have a TH7-II Raid with an HPT370 chip onboard an 2xWD400BB in a raid-0, and now I wanna test whether this might be the cause for my problem.
  14. Forgot to mention that my partitions are NTFS formatted, sorry.
  15. Does anybody know a good backup programm for WinXP (Professional) which backups really only the most important files? I know WinXP Prof. has a backup tool, but somehow I don't like it....
  16. Flintz

    XP backup program?

    Maybe it doesn't help, maybe it does....but anyway I want to have a backup of my registry, which is as far as I know located in WINDOWSsystem32configsoftware WINDOWSsystem32configsystem but as I wrote before these files are always in use by WinXP so Second Copy cant copy them....plz post any idea if u have one
  17. Flintz

    XP backup program?

    I tried WinXPRescue....and this program made a backup of these files: boot.ini WINDOWSsystem.ini WINDOWSsystem32AUTOEXEC.NT WINDOWSsystem32cmd.exe WINDOWSsystem32command.com WINDOWSsystem32CONFIG.NT WINDOWSwin.ini so, I entered them in Second Copy and added two files which I think are also very important: WINDOWSsystem32configsoftware WINDOWSsystem32configsystem BUT this files are in use by WinXP so Second Copy can't copy them....(the "try to copy..." function doesn't work) Is there somehow a way to tell Secon Copy to copy them, or do I have to backup them while WinXP is booting/shutting down....and if so, how do I do that?
  18. Flintz

    XP backup program?

    Secon Copy looks really nice, but as far as I can see it has no preinstalled profiles....now it would be nice if someone of you guys could give a list of the most important files to backup in WinXP Prof. because I obviously don't want to backup my whole XP directory :?
  19. Flintz

    XP backup program?

    I am not sure which are the most important files under XP, but I guess I only need the registry, user datas and some config files, so it should be MBs...
  20. Flintz

    WD400BB or WinXP issue??

    first thanks for the input... I think that I only had bad luck....and I don't think the PSU or the RAM are the reason but I will run the memory test (better be sure )
  21. Hi, first my configuration: P4 A 2,0 Ghz 1 GB RDRAM 2xWD400BB Raid-0 (Hpt370 onboard chip) Abit Th7-II Raid Mainboard WinXP Prof. Now, my WinXP crashed two times in the last few weeks and everytime I couldn't boot anymore. The first time only the registry hive was damaged but the second time nearly everything on the harddrive was corrupt....now I got concerned about the drives and put them alone on the controller and ran Spinrite over both drives. According to Spinrite both drives are 100% ok..... now my question: Was this simply a WinXP issue? (both times XP crashed while running....) or could it also be a harddrive issue with the 400BBs (no tool returns me any physical corruption of the drives)? Thanks in advance!
  22. Flintz

    XP backup program?

    no, just simply to another harddrive
  23. Flintz

    WD400BB or WinXP issue??

    the crashes in WinXP where just simple reboots.....I was working and suddenly my PC rebooted....after that reboot nothing worked anymore....
  24. Flintz

    WD400BB or WinXP issue??

    P.S.: In the time XP crashed both drives were installed above eath other and got quite hot (I put a sensor between them "highscore" was about 51°C) now they are still installed above eath other but now I put a 60mm fan in front ob them bolwing fresh air in the space between them. So could it also have been a heat issue?
  25. Flintz

    Intel Application Accelerator?

    I looked under Device Manager=>IDE/ATAPI controller devie=>Primary IDE channel=>Preferences and there should be a tab where it says: "Advanceed Settings" but I don't have this tab