Steined

Member
  • Content Count

    5
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Steined

  • Rank
    Member

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hi. I have an internal Western Digital Caviar Black and I'm using it via HDD Box as external.(Model : WDC WD1001FALS). I have tested it for bad sectors by Easeus surface test 2 times and it reports no bad sectors.But when I scan it by Checkdisk ,it reports 1292 kb in bad sectors.The drive is Bitlocker encrypted. My question: Is there any differences between Checkdisk scanning method and Easeus surface test?? Why the results are different?And is there any real bad sector in the drive and how to be sure?
  2. Hi.Im just wondering is that safe to keep an External HDD in full state for long time.I mean for Drive Health???Because the SMART softwares warn when a drive is in low space available??
  3. Steined

    HDD Total LBA Goes Up and Down

    I know they must Increase in RAW value that means Decrease in Percent.I have another external Seagate drive and these values are constant on 100%.I've checked by other SMART programs like: CrystalDiskInfo , HDDSentinel ,etc. and the values are going up and down.The strange thing (as you said) is this values are going up and down. I don't know should I replace drive using Warranty or not.??
  4. Hi.I have a ST2000LM003 HN-M201RAD Firmware 2BE10001 HDD on my laptop .The SMART monitoring software reports every few minutes a change in Total LBA Read and Written between 94 and 100.Is that normal?? This is the SMART events by ActiveSmart,The changes happen when using drive. Date;Time;Model;Serial;Type;Message 2017/03/29;10:00:12;ST2000LM003 HN-M201RAD;;INFO;"Monitoring started" 2017/03/29;10:18:47;ST2000LM003 HN-M201RAD;;ALERT;"SMART attribute changed: (F1 - Total LBA Written). Old value: 95, New value: 98" 2017/03/29;10:18:47;ST2000LM003 HN-M201RAD;;ALERT;"SMART attribute changed: (F2 - Total LBA Read). Old value: 99, New value: 98" 2017/03/29;10:50:27;ST2000LM003 HN-M201RAD;;ALERT;"SMART attribute changed: (F2 - Total LBA Read). Old value: 98, New value: 97" 2017/03/29;11:02:46;ST2000LM003 HN-M201RAD;;ALERT;"SMART attribute changed: (F2 - Total LBA Read). Old value: 97, New value: 96" 2017/03/29;11:05:48;ST2000LM003 HN-M201RAD;;ALERT;"SMART attribute changed: (F1 - Total LBA Written). Old value: 98, New value: 97" 2017/03/29;11:08:54;ST2000LM003 HN-M201RAD;;ALERT;"SMART attribute changed: (F1 - Total LBA Written). Old value: 97, New value: 100" 2017/03/29;11:13:54;ST2000LM003 HN-M201RAD;;ALERT;"SMART attribute changed: (F1 - Total LBA Written). Old value: 100, New value: 99" 2017/03/29;11:13:54;ST2000LM003 HN-M201RAD;;ALERT;"SMART attribute changed: (F2 - Total LBA Read). Old value: 96, New value: 95" 2017/03/29;11:16:56;ST2000LM003 HN-M201RAD;;ALERT;"SMART attribute changed: (F2 - Total LBA Read). Old value: 95, New value: 94" 2017/03/29;11:31:46;ST2000LM003 HN-M201RAD;;ALERT;"SMART attribute changed: (F2 - Total LBA Read). Old value: 94, New value: 100" 2017/03/29;11:46:46;ST2000LM003 HN-M201RAD;;ALERT;"SMART attribute changed: (F2 - Total LBA Read). Old value: 100, New value: 99" 2017/03/29;12:01:55;ST2000LM003 HN-M201RAD;;ALERT;"SMART attribute changed: (F1 - Total LBA Written). Old value: 99, New value: 95" 2017/03/29;12:01:55;ST2000LM003 HN-M201RAD;;ALERT;"SMART attribute changed: (F2 - Total LBA Read). Old value: 99, New value: 98" 2017/03/29;12:04:57;ST2000LM003 HN-M201RAD;;ALERT;"SMART attribute changed: (F1 - Total LBA Written). Old value: 95, New value: 96" 2017/03/29;12:08:03;ST2000LM003 HN-M201RAD;;ALERT;"SMART attribute changed: (F2 - Total LBA Read). Old value: 98, New value: 96" According Total LBA Read and Written Definition it must just Decrease but it's playing up and down. It passed all tests by Seatools but it worries me about suddenly HDD failure. How to make sure everything is ok???