Jump to content


Photo

Seagate NAS HDD Review Discussion


  • You cannot start a new topic
  • Please log in to reply
6 replies to this topic

#1 SR Writer

SR Writer

    Member

  • Member
  • 147 posts

Posted 13 June 2013 - 02:43 PM

The Seagate NAS HDD is a 3.5" form factor, 6Gb/s SATA interface hard drive that spins at 5,900RPM, ranges up to 4TB in capacity and is specifically engineered to be installed in one to five-bay NAS devices. With the consumer and small office NAS market growing quickly and with buyers usually opting for diskless models, Seagate is responding to market demand with this specific use-case drive. Of course there are loads of drives out there that users could implement to populate a NAS, but most are overkill or otherwise sub-optimal for the need. Seagate joins the NAS HDD market by designing a drive to handle NAS workload and operational requirements with their NASWorks specialized firmware, three-year warranty and support from many leading NAS vendors.
Seagate NAS HDD Review

#2 jtsn

jtsn

    Member

  • Member
  • 94 posts

Posted 21 June 2013 - 05:51 PM

So the Barracuda Green is actually back with a different name?

#3 Brian

Brian

    SR Admin

  • Admin
  • 5,207 posts

Posted 22 June 2013 - 05:09 PM

Heh, well not exactly, but sure ;)

Brian

Publisher- StorageReview.com
Twitter - @StorageReview

 

#4 expasion

expasion

    Member

  • Member
  • 5 posts

Posted 24 June 2013 - 09:47 AM

Seagate NAS HDD vs Seagate Constellation CS for a ZFS NAS? What would you choose?

#5 Kevin OBrien

Kevin OBrien

    StorageReview Editor

  • Admin
  • 1,423 posts

Posted 24 June 2013 - 12:16 PM

Whats the end application? Consumer/SMB or Enterprise?

#6 expasion

expasion

    Member

  • Member
  • 5 posts

Posted 24 June 2013 - 12:58 PM

Consumer, with only one client conneccted, but intensive read/write/search.
I'm thinking about 8-10x 3/4TB HDDs, and a second expansion pool for the future.
Obviously the safety of the data comes first, since it will be used for storing almost everything that I have.
I'm going to need RAIDZ3, to keep it on the safe side.

Edited by expasion, 24 June 2013 - 01:01 PM.

#7 toke lahti

toke lahti

    Member

  • Member
  • 5 posts

Posted 25 June 2013 - 04:16 AM

You don't test acustic noise or power usage yourself?
Comparing those would have been pretty interesting.
How about Toshiba's DT01ABA300V/PA4293E-1HN0?
Is it already too old to test?
It's very cheap now in Europe and I'm about to order those for home NAS...



1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users